PCO.IMAGING pco.1200 hs, Руководство пользователя

Страница: 11 / 44

Chapter 2
‚
Camera Startup
page 11
User Manual pco.camera status 12/2004
2 Camera Startup
2.1 Preparation
1. Check that the following cable connections have been
made:
-
camera is connected to the power supply via a special
cable;
-
camera is connected to the PC via a corresponding
interface cable;
-
pco.power is connected via an appropriate power cable to
the power line;
2. Check if the lens is properly tightened (C-mount) or in-
serted (F-mount).
2.2 Turn on the PC
Turn on the connected PC.
2.3 Turn on the Camera
Turn on the camera system by pressing the main power
switch on the front panel of pco.power and look for the
power and status -LED lights. The power light displays the
operating status of the power supply, while the status
light displays the operating status of the camera. The dis-
plays are coded as follows:
power -display:
•
orange flashing light:
•
selftest power supply
•
green permanent light:
•
normal operating status
•
red flashing light:
•
error
status -display:
•
orange flashing light:
•
selftest camera
•
green permanent light:
•
normal operating status
• green-orange flashing light: • exposure display
• red flashing light: • error
2.4 Starting Camware
To start the camware software program, look in the ap-
propriate computer directory for the following:
Programs – Digital Camera ToolBox
More information about camware is available in cam-
ware’s online help.