PCM 2003 5.0L MPI, Руководство по эксплуатации и техническому обслуживанию владельца

Страница: 23 / 83

20
L510010-03
C.C.
STOPPING ENGINE
When returning to the dock, or whenever stopping the
engine, bring the throttle back to the idle position. After
the engine reaches idle speed, turn the ignition key to
the OFF position.
Before stopping the engine after extended high speed
operation, allow the engine to idle at 1200 RPM for 3 to 5
minutes to allow the engine to cool down before shutting
off the ignition.
After stopping the engine, complete the following:
1. Turn the battery switch OFF, if equipped.
2. Close the fuel valve.
3. Close the seacock.
4. Flush the cooling system if in a salt water area.
OPERATING INSTRUCTIONS - 5
FREEZING TEMPERATURE OPERATION
If the possibility of freezing exists, the cooling system
must be protected after the engine is shut off to
prevent freeze damage to the engine. Refer to OUT-OF-
SEASON STORAGE for draining instructions.
OPERATION IN HIGH DEBRIS AREAS
If the boat is to be operated in high debris areas, a
sea strainer should be installed in the water inlet hose
to prevent debris from entering the cooling system.
The strainer used must be of suffi cient size to allow
an adequate supply of water for cooling the engine. A
minimum of 30 gallons per minute (114 liters per minute)
fl ow rate is required.