PCE Instruments PCE-PWT 10, Руководство пользователя

Страница: 4 / 17

© PCE Instruments
2
2 Introduction
Thank you for selecting the PCE-PWT 10 pocket salinity tester. This manual provides a step-by-
step guide to help you operate the meter, please carefully read the following instructions before
use. The following list describes the standard accessories of the tester. After unpacking, please
check that all accessories are complete. If any are damaged or missing, please contact the
nearest distributor.
3 Keypad
PCE-PWT 10 pocket salinity tester has a succinct membrane keypad, names and symbols which
describe each of the function key controls.
KEY FUNCTION
MEAS/HOLD
●
Power the tester ON/OFF.
●
Freezes the measured values on the
display, press the key again to resume
measuring.
●
In the calibration mode, exits calibration
and returns to measurement mode.
●
Press the key to enter the calibration
mode.
●
Press and hold the key to enter setup
menu.
●
In the calibration mode, press the key to
set calibration values.
●
In the setup mode, press the key to select
default option.
ENTER
●
Confirms the calibration or displayed
option.
●
Toggles between conductivity and salinity
measurement modes.