PCE Instruments PCE-MMK 1, Руководство пользователя

Страница: 9 / 11

© PCE Instruments
7
7.1 Selection of wood group (W1, W2, W3)
The device has three groups (W1, W2, W3) for wood and wood-like materials. You can change
the group by briefly pressing the [SET] key. The following chart shows what kind of wood belongs
to which wood group.
Wood groups
W1 W2 W3
Abachi Agba Mahogany Afrormosia / assamela
Pear tree Maple Pine tree Rubber tree
Black afara Alder Chestnut Coco-produa
Beech Aspen Khaya
Dabema Balsa Cherry Cork
Ebony Tree heath Pine Melamine chipboard
Red oak Beech, European Poplar (general) Phenolic resin
chipboard
Oak Birch, yellow birch Plum
Ash Logwood Sandalwood
Ash, American Oak Swiss pine
Ash, Japanese Aspen Walnut
Lime tree Alder White maple
Rosewood Alder, red White birch
Rosewood Alder, black White beech
Copper beech English oak White Poplar
Silver poplar Ash Juniper
Teak Yellow birch Trembling poplar
Winter linden Yellow pine Cypress
Winter linden,
American Douglas fir Elm
Willow Red cypress
White oak Horse chestnut Wood fibre insulation
board
Cedar Tree of life Fibreboard
Cypress Larch Kauramin chipboard
Cardboard Chestnut Paper
7.2 Selection of building material group (B1, B2, B3, B4)
The device has characteristic curves for four groups of building materials. You can switch between
these by briefly pressing the [SET] key.
B1
Plaster
B2 Aerated concrete
B3E Screed
B4 Concrete