PCE Instruments PCE-ITM 20, Руководство пользователя

Страница: 17 / 30

© PCE Instruments
13
3.10 Temperature Measurements
• Set the function switch to the green Temp position.
• Insert the Temperature Probe into the input jacks, making
sure to observe the correct polarity.
• Press the MODE button to indicate “ºF” or “ºC”.
• Touch the Temperature Probe head to the part whose
temperature you wish to measure. Keeps the probe touching
the part under test until the reading stabilizes (about 30
seconds).
• Read the temperature in the display.
Note :
The temperature probe is fitted with a K-type mini connector. A
mini connector to banana connector adaptor is supplied for
connection to the input banana jacks.
3.11 Frequency (Duty Cycle) Measurements (electronic)
• Set the rotary function switch to the green H z/%
position.
• Insert the black lead banana plug into the negative COM
jack and the red test lead banana p lug into the positive
Hz jack.
• Touch the test probe tips to the circuit under test.
• Read the frequency on the display.
• Press the MODE button to indicate “%”.
• Read the % duty cycle in the display.