PCE Instruments PCE-CT 90, Руководство пользователя

Страница: 16 / 28

© PCE Instruments
13
Eng
li
s
h
2 Specifications
2.1 Technical specifications
Specifications of the meter PCE-CT 90
Specification Description
Measurement range Depending on probe (see sensor chart)
Accuracy Depending on probe (see sensor chart)
Measurable materials
Magnetic materials (iron, steel…)
Non-
magnetic materials (paint, plastics, ceramics, …)
Min. radius of curvature
0.3 … 50 mm (depending on probe)
Calibration Zero-point calibration, single-point calibration
Units µm, mm, °C
Power supply 2 x 1.5 V AAA batteries (DC)
Display Graphic display
Operating conditions -10
… +40 °C
20 ... 98 % RH, non-condensing at 35 °C
Storage conditions
+5 … +40 °C
80 % RH, non-condensing at 25 °C
Dimensions 136 mm x 75 mm x 32 mm
Weight 168 g
Specifications of the selectable probes
Specification
Description
Model
Measurement
range
Accuracy Measurement description
Fe-0.3* 0 ... 300 µm ±(0.03xh+0.001) mm Paints, lacquers, electroplating
Fe-0.5*
0 … 500 µm
±(0.03xh+0.001) mm Paints, lacquers, electroplating
Fe-2*
0 … 2000 µm
±(0.03xh+0.002) mm Paints, lacquers
Fe-5*
0 … 5000 µm
±(0.03xh+0.002) mm Lacquer coating, thick coating
NFe-2**
0 … 2000 µm
±(0.03xh+0.002) mm Anodic oxide layers, lacquer layers
M12***
0 … 12 mm
±(0.03xh+0.001) mm Thick coating
M30***
0 … 30 mm
±(0.03xh+0.002) mm Thick coating
M60***
0 … 60 mm
±(0.03xh+0.003) mm Thick coating
DT -
50 …+125°C
±1 °C Surface temperature
DTVR
Temperature:
-
50 …125 °C
Humidity:
0 … 100 %
Dew point:
-
15 …+40 °C
±1 °C
±5 %
±2 °C
Air temperature, air humidity, dew
point
DSH
1 … 300 µm
±(0.03xh+0.002) mm Roughness
h is the nominal height of the coating or the depth of the grooves in mm (roughness).
* Fe: only for ferromagnetic substrates
** NFe: only for non-ferromagnetic substrates
*** Fe and NFe: for ferromagnetic and non-ferromagnetic substrates