© PCE Instruments
8
14.1
PC transfer
First connect the meter to the PC using a micro USB cable.
Important:
To establish a PC connection, the Bluetooth function in the meter must be switched
off.
Note:
You can also find the software on the download page on
https://www.pce-instruments.com
Then open the "Coatingmaster" software. Under "Port" select "Silicon Laps CP210x USB to UART
Bridge". If this is not available, the driver may be missing. You can find the driver in the program
folder under the "driver" folder. If you have a 64-bit system, use the installation file
"CP210xVCPInstaller_x64".
If you have a 32-bit system, use the installation file
"CP210xVCPInstaller_x86" to install the driver.
Now click on "Connect". The software now establishes a connection to the meter.
Under the tab "Data", the displays on the meter are now shown mirrored in the programme. This
means that the data are live-transferred to the PC. The software is synchronised with the meter
via the "Sync" button.
