© PCE Instruments
21
6
Haze measurement with photometer sphere
If you have a photometer sphere, you can use it to measure turbidity. Please note the following
steps:
1.
Connect the light source to the mains power supply and switch it on.
2.
Click on "Haze measurement". This will open several windows that will help you to
perform the measurement.
3.
Click on "OK" (bottom left window) and the software starts a zeroing process.
4.
Click on "OK" (bottom right window) and the software starts measuring the product
placed on the measuring table.
5.
When you have removed the photometer sphere, click on "OK" (bottom left window)
and the software starts a zeroing process.
6.
Click on "OK" (bottom right window) and the software starts measuring the product
placed on the measuring table.
7.
After the measurement has been performed, the software calculates the turbidity. The
measurement data are then displayed in a new window.
