© PCE Instruments
3
4
Counting function
4.1
Determining individual weights with the balance
- Place any quantity of pieces on the balance as a reference.
- Enter the number of pieces via the keyboard.
- Press the
SAMPLE
key.
- under
UNIT WEIGHT,
the determined individual weight is displayed
a) Count immediately with this single weight
- Remove reference quantity
- Place container on platform and
tare
with
>T<
key
.
- Fill quantity to be counted into container.
- Total weight, individual weight and number of pieces are displayed.
b) Save single weight
- Press the
SAVE
key.
- The indication "(01)" for memory item 01 appears under
Weight.
- Change memory item number (01) to (16) with the key.
- Confirm with
ENTER.
c) Retrieve individual weight from memory
- Type in the memory item number.
- Press the
READ
key.
- The saved individual weight appears under
UNIT WEIGHT.
4.2
Determine individual weight via keyboard
- Enter individual weight via keyboard.
- Delete wrong values with
C
key.
- Press the
UNIT
key to count immediately
- Continue as under 4.1 b) and 4.1 c).
5
Quantity check function
5.1
Specify number of pieces as target quantity
- Press the
key,
CH=OFF
appears under
Weight.
- Press the key twice so that the 0 flashes under
Total.
- Enter target quantity via keyboard, e. g. 25.
- Press to return to
CH=OFF.
- Press the
key - all displays return to 0.
5.2
Checking the piece quantity - check function with alarm
- The check function must be set to
CH=ON.
- Press the
key, change with ENTER,
- Back with
key.
- Place the weighing container on the platform and
tare
with
>T<.
- Enter individual weight as under chapter 4.1 or 4.2.
- Add quantity to be checked.
- The current number of pieces is displayed and if the preset number of pieces is exceeded, an
alarm sounds.
