M758LMR Mainboard User’s Manual
Expansion Slots
This mainboard has two 32-bit PCI expansion slots.
Follow the steps below to install a PCI expansion card.
1. Locate the PCI slots on the mainboard.
2. Remove the slot cover for the expansion slot from the system
chassis.
3. Insert the expansion card edge connector into the slot and press
it firmly down into it so that it is fully inserted.
4. Secure the expansion card bracket to the system chassis using
the screw that held the slot cover in place.
Wake On LAN (WOL)
If you are using an ATX power supply you can configure your
system so that it powers down by software and can be resumed by
alarms. If you have installed a LAN adapter expansion card,
connect the card to the Wake On LAN connector
J8
. This allows
incoming traffic to resume the system from a software power
down. You need to enable this feature in the system setup utility.
18
PCI1
PCI2
J8-
WOL connector
