Paxton BLU Expansion Controller, Руководство по установке, Страница: 8 / 12

8
Tip: You can power cycle the expansion unit by removing and replacing the two pin power plug at the top left of the
power supply (row of four two pin plugs) marked 12V-24V and 0V.
You will not need to do anything with this information at this point. Make a note of how this information is obtained as it will be
needed should the wiring label be lost or misplaced. This information may be required by Paxton technical support for diagnostics
and troubleshooting.
Firmware Update
NOTE: It is important to update the firmware to the latest available version before proceeding further.
Select the ‘Update Firmware’ button. Power cycle the Master unit as described above to start the firmware update. If you receive an ‘access to the
port XX is denied’ error message from Windows, click the OK button and power cycle the unit again to attempt to re-start the firmware update.
The firmware update will take a minute, once the green bar has progressed to fill the space, the update is complete. You can check the version of
firmware installed using the ‘View Device Detail’ option described in the previous section.
Tip: It is useful to know which version of firmware is installed whenever you contact Technical Support.
Tip: Remember to always download the latest version of the installer tool to ensure you have the most recent
version of firmware to download.
Please store the adapter in a safe place. You will need this for future updates to this expansion unit along with any updates to the master controller.
If you are updating firmware on a unit already in use you may need to re-instate this controller in the software following the firmware update to
ensure all settings are up to date.
You have now completed the initial configuration of the expansion controller, power cycle the unit and log into your Paxton BLU account (my.
paxton-blu.com), go to Help and select Quick Start Guide to assist you in setting up the controller in your customer and site.