BENCH SWING
INSTRUCTIONS
• BACK BENCH ASSEMBLY
• SEAT BENCH ASSEMBLY
• RIGHT & LEFT ARM ASSEMBLY
CHAIR PARTS
• RUBBER MALLET
• PHILLIPS HEAD SCREWDRIVER
• DRILL
• 1/2” Wrench
SUGGESTED TOOLS
STEP 1.
Use (6) 2” bolts and (6) barrel nuts to connect the back
bench assembly to the seat bench assembly.
NOTE: Rear seat support beam is hidden to show assembly.
REAR VIEW OF SWING
ASSEMBLY
2”
BOLTS
2”
BOLTS
BARREL
NUTS
1.
2.
HARDWARE PACK
#6091 / 0217
1. BARREL BOLTS: (12) 2” Bolts
2. BARREL NUTS: (12)
3. Hex Key (Not Shown)
• CHAIN ASSEMBLY & HARDWARE PACK
• CHAIN SETS: (2)
Eye Bolts, nuts, and washers attached
• TREE HOOKS (2)
LONG
CHAIN
FRONT
SHORT
CHAIN
BACK
4” EYE
BOLT
4” EYE
BOLT
NOTE.
(NOT DISPLAYED)
Chains come attached to arms
NOTE: CHAIN HIDDEN TO SHOW DETAIL OF SWING
