3 Product description
6
993603x2x-mub-en – V09
2016/01
3
Product description
The HeatBloC K36E is a preassembled fitting group for hydronic heating closed-loop systems.
The pump can be isolated by means of the ball valves and can thus be maintained without draining
of the system.
You can mount the PAW HeatBloC directly onto a wall bracket or under/on a PAW modular
distribution manifold. With adaptor connections, PAW HeatBloCs can also be installed on
PAW distribution manifolds with other dimensions.
3.1
Equipment
A-1
Return (consumer circuit)
A-2
Thermo controller
B
Heating pump
C-2
Full metal thermometer integrated in
the ball valve (return, blue)
C-1
Return (boiler)
D-1
Flow (boiler)
D-2
Full metal thermometer integrated in
the ball valve (flow, red)
E
Flow tube
F
Design insulation with
optimised function
G-2
Check valve, can be opened
G-3
Coupling piece for
overhead installation
G-1
Flow (consumer circuit)