4 Assembly and installation [specialist]
2016/01
993603x2x-mub-en – V09
13
4
Assembly and installation [specialist]
The HeatBloC K36E must be either installed with a wall bracket or under/on a PAW modular
distribution manifold. The K36E is prepared for assembly under a distribution manifold DN 25 when
it is delivered. If you want to mount the K36E on a distribution manifold, remove the coupling piece
for overhead installation (G-3).
The wall bracket and the distribution manifold are not included in delivery.
NOTICE
Damage to property!
The location of installation must be dry, load-carrying, frost-proof and protected against
ultraviolet radiation to prevent material damage to the installation.