background image

43911  pg 4

0411   Rev.  A

Step Seven

R

E

-I

NSTALL

 S

IDE

 F

RAME

 B

OLTS

Use the bolts that were removed in Step 2 
to secure each end of the Rear Bumper.

LIMITED WARRANTY

We warrant our product to be free from defects in material and workmanship, for terms specifi ed below, provided 
there has been normal use and proper mainte nance. This warranty applies to the original purchaser only. All 
remedies under this warranty are limited to the repair or replacement of any item or items found by the factory to 
be defective within the time period specifi ed.

If you have a warranty claim, fi rst you must call our factory at the number below for instructions. You must retain 
proof of purchase and submit a copy with any items returned for warranty work. Upon completion of warranty 
work, if any, we will return the repaired or replaced item or items to you freight prepaid.  Damage to our products 
caused by accidents, fi re, vandalism, negligence, misinstallation, misuse, Acts of God, or by defective parts not 
manufactured by us, is not covered under this warranty.

THE WARRANTY TIME PERIOD IS AS FOLLOWS: ALL “GOODS” MANUFACTURED BY OUR COMPANY: ONE 
YEAR FROM DATE OF PURCHASE.

ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE 
CREATED HEREBY ARE LIMITED IN DURATION TO THE SAME DURATION AND SCOPE AS THE EXPRESS 
WRITTEN WARRANTY.  OUR COMPANY SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUEN-
TIAL DAMAGE.

Some states do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of inci-
dental or consequential damages, so the above limitations or exclusions may not apply to you.

This warranty gives you specifi c legal rights, and you may also have other rights which vary from state to state.

For further information, please contact: 

Customer Service

 877-638-9509

All or a portion of this product may have been made in China

.

Reinstall 
Factory Bolts

DO NOT cut, drill, weld 
or modify the Bumper.

Содержание 43911

Страница 1: ...f Contents PARTS LIST PAGE 2 TOOLS NEEDED PAGE 2 INSTALLATION PAGE 2 WARRANTY PAGE 4 DO NOT INSTALL THIS PRODUCT ON ANY VEHICLE OTHER THAN THOSE LISTED ABOVE This product is only designed for the vehicles listed above Failure to install this product on the proper vehicle could cause injury to the vehicle occupants and damage to the product ...

Страница 2: ...e bumper and discard them Step Two REMOVE BOLTS ON END OF FACTORY BUMPER Use a socket wrench and 5 8 socket to remove the two 2 bolts on each side of the bumper that attach it to the frame Set the bolts aside to be re used Tools Needed Ratchet 18mm and 5 8 Sockets Hammer 18mm and 5 8 Wrenches Safety Glasses Rear Bumper Part Number 43911 Qty 1 Two or more people may be required to lift the bumper s...

Страница 3: ...fely Step Four REMOVE FACTORY BUMPER Position a person on each end of the bumper to lift it away from the vehicle Set the bumper aside Two or more people may be required to lift the bumper safely Step Five INSTALL REAR BUMPER Position a person on each end of the Rear Bumper to lift it onto the vehicle View from under bumper Install Washers and Lock Washers Step Six INSTALL CENTER BOLTS Locate the ...

Страница 4: ...our products caused by accidents fire vandalism negligence misinstallation misuse Acts of God or by defective parts not manufactured by us is not covered under this warranty THE WARRANTY TIME PERIOD ISAS FOLLOWS ALL GOODS MANUFACTURED BY OUR COMPANY ONE YEAR FROM DATE OF PURCHASE ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND OR FITNESS FOR A PARTICULAR PURPOSE CREATED HEREBY ARE LIMITED IN DURATIO...

Отзывы: