6
room. The projection range is 3 – 9 feet.
SETTING ALARMS
1. Press the
ALARM 1 SET / ALARM 2 SET
button (17/16) once to preview the alarm
time. The alarm time is displayed and will blink.
2. Press & hold the
ALARM 1 SET / ALARM 2 SET
button (17/16) for 3 seconds and
the hours will blink. Press the
TUNE +
(18) or
TUNE -
(9) to set the alarm hour.
3. Press the
ALARM 1 SET / ALARM 2 SET
button (17/16) again and the minutes will
blink. Press the
TUNE +
(18) or
TUNE -
(9) to set the alarm minutes.
4. Press the
ALARM 1 SET / ALARM 2 SET
button (17/16) to set the alarm sound
mode: Buzzer or Radio. The alarm sound mode will blink. Press
TUNE +
(18) or
TUNE -
(9) to set the alarm sound mode.
5. If you select Radio as the alarm sound mode, the volume will blink on the display.
Press
TUNE +
(18) or
TUNE -
(9) to select the desired radio volume. Then press the
ALARM 1 SET / ALARM 2 SET
button (17/16) to set the volume.
6. If you select Buzzer as the alarm sound mode, the volume of the buzzer alarm will
gradually increase when it sounds.
7. To turn off the Radio or Buzzer alarm after it sounds, turn it OFF by pressing the
ALARM 1 SET / ALARM 2 SET
button (17/16).
NOTE:
Alarm 1 / 2 will ring again at the same time each day unless changed.
To stop Alarm 1 / 2 from automatically sounding on the following days, press &
ALARM 1 SET / ALARM 2 SET
button (17/16) for 3 seconds in standby mode, the
ALARM 1 / 2 indicator
will be turned off and alarm 1 / 2 will be disabled until reset.
To resume alarm 1 / 2, press & hold
ALARM 1 SET / ALARM 2 SET
button (17/16)
again for 3 seconds in standby mode.
SNOOZE FUNCTION
When the alarm rings, press
SNOOZE
button (2) to suspend the alarm and activate the
snooze function, alarm will stop & will ring again 9 minutes later. Press
SNOOZE
button
again, alarm will stop and ring 9 minutes later the alarm will ring again and so on.
NOTE:
The Snooze interval time is automatically set at 9 minutes.
To turn the Snooze function OFF, press
ALARM 1 SET / ALARM 2 SET
button
(17/16) once.
If you press and hold the
ALARM 1 SET / ALARM 2 SET
button (17/16), the alarm
indicator will be turned off, indicating that the alarm is disabled.
SLEEP FUNCTION
When listening to radio, press
SLEEP
button (2) to enter sleep mode. You can just
adjust the sleep timer from 10 to 90 minutes by pressing the
SLEEP
button (2). The unit
will automatically turn off after the selected time expires.
LISTENING TO THE RADIO
NOTE:
Ensure that the FM antenna is completely unrolled and extended to have the
best FM reception.
The AM band uses an internal, directional antenna. Therefore, rotate the entire
radio for best AM reception.
