manualshive.com logo in svg

Patton CopperLink CL2300, Руководство пользователя, Страница: 78 / 116

Поделиться
Скачать
Patton CopperLink CL2300 Скачать руководство пользователя страница 78

Basic System Management Configuration Task List

78

CopperLink CL2300 User Manual 

10

 

•  Basic System Management

To create a system banner use the 

banner

 command followed by the message you want displayed. If the banner 

message has to be formed out of more than one word the information is enclosed by double quotes. Adding the 
escape sequence “\n” to the string forming the banner creates a new line on the connected terminal screen. Use 
the 

no banner

 command to delete the message. 

Mechanical Tools Inc.

[email protected]

Phone 818 700 1402

login: 

Mode:

 Configure

Step

Command

Purpose

1

device

(cfg)#banner 

message

Sets the message for the system banner to 

message

Example: 

Setting the system banner

The following example shows how to set a message for the system banner for the CL2300, if you start from the 

configuration mode. 

device(cfg)#banner \n#\n# The password of all operators has changed\n# please con-

tact the administrator\n#"

Setting Time and Date

All Patton devices provide time-of-day and date services. These services allow the products to accurately keep 
track of the current time and date. The system clock specifies year, month, day, hour, minutes, and optionally 
seconds. The time is in 24-hour format 

yyyy-mm-ddThh:mm:ss

 and is retained after a reload.

Mode:

 Configure

Step

Command

Purpose

1

device

(cfg)#clock set

 

yyyy-mm-ddThh:mm:ss

Sets the system clock to 

yyyy-mm-

ddThh:mm:ss

Example:

 Setting time and date

The following example shows the commands used to set the system clock of your device to August 6, 2001 at 

16:55:57, if you start from the operator execution mode.

device(cfg)#clock set 2001-08-06T16:55:57

Configuring Daylight Savings Time Rules

Trinity allows configuring daylight saving time rules, which affect the local clock offset without changing the 

configuration. After booting up and loading the configuration, the daylight saving rules are checked and 
applied automatically. The rules consist of a default-offset and one or multiple dst-rules. The offset of a dst-rule 
is active if the local clock is between the specified start and stop time of the rule. If the local clock is outside the 
specified start and stop time of all specified rules, then the default-offset is active.

Содержание CopperLink CL2300





















































































































Отзывы:

Нет отзывов