Model 3088/I Quick Start Guide
7
5.0 Connect the G.SHDSL Port
1.
Obtain single-twisted-pair cable with an RJ-11 plug connector at each end.
2.
Plug one end of the cable into the (yellow) RJ-11 socket (labelled
Line)
on the RocketLink-G NTU.
3.
Plug the other end of the cable into the RJ-11 wall socket that provides your G.SHDSL service.
4.
Go to
G.SHDSL > Configuration
to configure the DSL port parameters.
Note
If two RocketLink-G NTUs are connected back-to-back, one must be configured as
Remote
, the other as
Central
.
5.
The
WAN Link
LED will flash while in the process of establishing a link. The LED will be on constantly once
a valid DSL connection is established.
6.0 Additional Information
For detailed information about configuring and operating guidance, set up procedures, and troubleshooting,
refer to the
RocketLink-G 3088/I User Manual
available online at
www.patton.com/manuals/
3088i.pdf
.
A.0 Customer and Technical Support
Toll-Free VoIP support:
call
with a VoIP SIP phone
Online support:
www.patton.com
E-mail support:
—answered within 1 business day
Telephone support:
•
Standard: +1 (301) 975-1007 (USA), Monday–Friday: 8:00 am to 5:00 pm EST (1300 to 2200 UTC/GMT)
•
Alternate: +41 (0)31 985 25 55 (Switzerland), Monday–Friday: 8:00 am to 5:00 pm CET (0900 to 1800
UTC/GMT)
Fax:
+1 (253) 663-5693
(USA)
or +41 (0)31 985 25 26 (
Switzerland)
Содержание RocketLink-G 3088/I
Страница 12: ...12 Model 3088 I Quick Start Guide...