T
he Patton Model 3086 ipRocketLink
IAD redefines access and sets the
new standard for customer premise
equipment. Based on European
Telecommunications Standardization
Institute (ETSI) and International
Telecommunications Union (ITU) G.SHDSL
G.991.2 standard, the Patton 3086
ipRocketLink enables 2.3/4.6 Mbps speeds
at nx64 (n=1..36/72) over a single pair of
wires while combining standards-based
transmission with Synchronous-Serial,
Ethernet, and high speed IP routing…all in
one compact package.
With Patton’s FlexIP™ architecture, the
Model 3086 offers V.35, X.21, or T1/E1
Sync-Serial interfaces
and
10/100 Ethernet
ports. Integrated software selectable
DCE/DTE support eliminates messy
crossover cables. The Ethernet port
enables access to any IP network via ATM,
PPP, or Frame Relay. Both interfaces can
be simultaneously selected with user-
defined bandwidth for each port.
The 3086 boasts easy installation with DIP
switch, Telnet, and WWW/SNMP manage-
ment. It provides bridging and routing
functionality, along with advanced IP fea-
tures like NAT and Firewall, and optional
IPSec-based VPN. As part of Patton’s fam-
ily of ipDSL products, the Model 3086
offers a complete, managed, end-to-end
system when used with Patton’s central
site access concentrators.
Visit
www.patton.com
for more informa-
tion.
Deploy multiple managed services with the Model 3086 ipRocketLink over 2-wire standards-based G.SHDSL
transmission.
G.SHDSL Integrated Access
Device
Model 3086 ipRocketLink IAD
NetLink™ Access Products
Built-in Ethernet/IP Router Standard
With Patton’s FlexIP architecture, split the band-
width and use both interfaces at the same time
Choice of V.35, X.21, or T1/E1
Get the right interface with the right connector
and avoid messy adapter or crossover cables
Get ATM, PPP, and Frame Relay
Versatile interface options allow for simple
deployment into any network environment
nx64 Speeds to 2.3/4.6 Mbps
User-selectable data rates for Sync-Serial, WAN, or
Ethernet/IP ports. Use as a standalone or with the
ForeFront Access system
Interoperable with Third-Party DSLAMs
Take advantage of Patton reliability whether you
connect back-to-back or to a third-party DSLAM.
LEDs and Full V.52/V.54 Diagnostics
Easy-to-access toggle switches let you test the
link with built-in test modes. LEDs provide clear
status at-a-glance
Model 3086 ipRocketLink IAD
• Simultaneous use of serial and
Ethernet interfaces
• Internal universal (90–260) AC or
48V DC power
• 13 LEDs show status at-a-glance
• Configure with console, Web,
Telnet, or DIP-switches
• Built-in Ethernet MDI-X for
easy connections to hubs and PCs
WWW/SNMP Manageable
Built-in VT-100 console port makes setup a snap,
and you can use the embedded HTTP/SNMP
agent to manage the Model 3086 from anywhere
in the world.
