manualshive.com logo in svg

Patton electronics Access Server, Справочное руководство администратора

«Patton Electronics Access Server - это надежное устройство для управления сетью. Пользователи могут загрузить бесплатное "Руководство администратора" с нашего сайта, чтобы получить полные инструкции по установке и настройке. Скачайте его с manualshive.com прямо сейчас!»

Поделиться
Скачать
background image

7 • Dial In

Access Server Administrators’ Reference Guide

84

Dial In User Statistics window

Termination Reason (diactTerminateReason) 

The reason a call was disconnected.

•

stillActive(0)—Call is currently connected

•

idleTimeout(2)—Call exceeded idle timeout parameter

•

killed(3)—Call terminated by administrator

•

userHangup (5)—DSP discovered remote modem was hung up abruptly. Examples could be that the phone 
line was pulled out of the wall jack or the user terminated the communications without closing the connec-
tion down. If the modems are unable to bring up the physical line by successfully negotiating the modula-
tion, userHangup will be registered if the remote modem gave up trying to complete the call.

•

modemCanNotConnect(6)—The modems are not able to bring up the physical line by successfully negoti-
ating the modulation. The 2800 has given up trying further to complete the physical connection.

•

pppClose(8)—This termination reason will be given after PPP is initated and the connection is  discon-
nected. An example would be if LCP negotiations failed. Another cause could be if the bundlehead in a 
multilink call is terminated before the tunneled call is termination. 

•

lcpClose(9)—Close initiated by LCP. normal shutdown of call

•

loginTimeOut(10)—Exceeded login timeout parameter

•

userTerminated(11)—A problem is discovered initiating  the dial-in users telnet, rlogin or tcpclear session.

•

maxNumCalls(21)—Exceeds maximum number of channels that can be allocated to the same call.

•

notPapReq(24)—The access server is waiting for a PAP request packet containing the username/password 
for a call but the packet received was not a PAP request packet.

•

noIpPoolAddr(30)—Authentication server did not assign an IP address and access had no IP address pool 
defined to assign an IP address

•

noIpAddr(31)—Authenticator did not return an IP address for the service (eg telnet or rlogin) and the 
default service defined does not specify the service IP address

•

maxLoginAttempts(32)—Exceeded maximum login attempts as defined under the Dial-in link.

•

invalidDefaults(44)—Default service is set to a value other than rlogin, telnet, tcpraw, ppp, slip or vpn 
when using a login technique of None.  No IP address is defined when using rlogin or telnet.  Invalid telnet 
or rlogin services ports have been defined in the default service.

•

noDspAvailable(45)—When the 2800 attempted to connect the incoming call to an available DSP, no DSP 
could be found. Some examples why a DSP could not be found are: 

–

DSPs are no longer available to the resource pool because they are in reboot or hardware failure states. 

–

DSPs are in an unavailable administrative state although they are functional.

–

The DSP resource pool is split between link A and link B and a call has been routed to a link over and 

above the number of DSPs allocated to that link.

•

papAuthenticationFailure(49)—Invalid username/password combination

•

papInvalidPacket(50)—Non-printable characters in username or password received from remote end dur-
ing authentication

Содержание Access Server







































































































































































































































































Отзывы:

Нет отзывов

Похожие инструкции для Access Server

A10 Networks AX Series Deployment Manual preview
AX Series
Бренд: A10 Networks Страницы: 17
IBM eServer BladeCenter JS20 Type 8842 Installation And User Manual preview
eServer BladeCenter JS20 Type 8842
Бренд: IBM Страницы: 150
MSI MS-9238 User Manual preview
MS-9238
Бренд: MSI Страницы: 107
H3C UniServer E3200 G3 User Manual preview
UniServer E3200 G3
Бренд: H3C Страницы: 401
Supermicro SUPERO SuperServer 1018L-MP User Manual preview
SUPERO SuperServer 1018L-MP
Бренд: Supermicro Страницы: 104
Ubiquiti UniFi UAS-PRO Quick Start Manual preview
UniFi UAS-PRO
Бренд: Ubiquiti Страницы: 28
Telvue HyperCaster User Manual preview
HyperCaster
Бренд: Telvue Страницы: 153
Navico SonicHub 2 Installation Manual preview
SonicHub 2
Бренд: Navico Страницы: 2
Asus RS160-E4 PA4 User Manual preview
RS160-E4 PA4
Бренд: Asus Страницы: 186
Buffalo TeraStation TS-RXL/R5 User Manual preview
TeraStation TS-RXL/R5
Бренд: Buffalo Страницы: 91
Supermicro SuperServer 2029BT-HNC0R User Manual preview
SuperServer 2029BT-HNC0R
Бренд: Supermicro Страницы: 148
Epson RIP Station 5100 Administrator'S Manual preview
RIP Station 5100
Бренд: Epson Страницы: 140
JIEYUN TECHNOLOGY J60 User Manual preview
J60
Бренд: JIEYUN TECHNOLOGY Страницы: 25
EVS GX User Manual preview
GX
Бренд: EVS Страницы: 74
Chip PC JackPC EFI6800 Specifications preview
JackPC EFI6800
Бренд: Chip PC Страницы: 4
PROXMOX A3-SERVER Quick Start Manual preview
A3-SERVER
Бренд: PROXMOX Страницы: 2
DM&P Group eBOX-3800 EmbedBox User Manual preview
eBOX-3800 EmbedBox
Бренд: DM&P Group Страницы: 28
Multitech ProxyServer MTPSR3-100 User Manual preview
ProxyServer MTPSR3-100
Бренд: Multitech Страницы: 79

Бренды по названию

Популярные бренды

Загрузить еще бренды