![background image](http://html1.mh-extra.com/html/patton-electronics/access-server/access-server_administrators-reference-manual_763700138.webp)
13 • Frame Relay
Access Server Administrators’ Reference Guide
138
Configuring a Frame Relay link
Note
The following settings must match the line configuration provided by
the local telephone company.
4. Click on the
Line Type
drop-down menu and choose one of the following options:
— For a T1 line, select
dsx1ESF(2)
(Extended SuperFrame DS1) or
dsx1D4(3)
(A&T D4 format DS1).
— For an E1 line, choose either
dsx1E1(4)
or
dsx1E1-CRC(5)
.
5. Click on the
Line Coding
drop-down menu and choose one of the following options:
— For T1: If you selected
dsx1D4(3)
line type, select
dsx1AMI(5)
line coding. If you selected
dsx1ESF(2)
line type, choose
dsx1B8ZS(2)
line coding.
— For E1: Select either
dsx1AMI(5)
or
dsx1HDB3(3)
. Most installations will use HDB3.
6. Click on the
Line Build Out
drop-down menu and choose one of the following options:
— For T1: Select
t1pulse0dB(2)
.
— For E1, select
e1pulse(1)
.
7. Click
Submit
.
At this point, the access server’s front panel LEDs should now be showing signs that the line is active. If the
phone company line is not connected to the access server, the error indicator will glow red for that line/
connection.
WAN Channel Assignment main screen
The next stage in configuring a Frame Relay link is to set the number of n x 64 channels on the T1/E1 that will
carry the data. Each channel is 64 kbps in speed and must correspond to the same channels that your provider
is using. Usually your provider will start from channel 1. For example: a 256-kbps link could be divided into
64-kbps channels numbered 1, 2, 3, and 4.
To set the channel assignment:
1. Click on
T1/E1 Link
under the
Configuration Menu
to to display the T1/E1 Link Activity main window
2. Click on
Channel Assignment
in the appropriate Link: x section (for example, if the T1/E1 cable was con-
nected to port 2, you would click on
Channel Assignment
in the
Link: 2
section).
3. Click on the channel 1 drop-down menu and select
frameRelay(3)
.
Note
You can have some channels as a Frame Relay link on the same WAN
link that you are also using for dial-up calls. Each channel that is set
to Frame Relay will reduce the number of simultaneous calls. You also
must arrange with your provider to allow both Frame Relay and cir-
cuit-switched calls on the same WAN link.
4. Repeat step 3 to configure remaining channels.
5. Click
Submit
.
The link is now activated on your access server. The next stages will configure Frame Relay and IP routing.
Содержание Access Server
