![background image](http://html1.mh-extra.com/html/patton-electronics/3196rc/3196rc_user-manual_4063045041.webp)
Using a browser to complete Model 3196RC configuration
41
Model 3196RC T-DAC User Manual
3 • Configuring the T-DAC for operation
19.
Press the left-arrow cursor key until the TOP LEVEL MANAGEMENT window displays.
20.
Select
a
for
Home
, then press
<Enter>
.
21.
Under the
Current Status
page, type
1
(
store Config(1)
) to save the changes you have just made to the con-
figuration.
This completes the initial configuration of the Model 3196RC. The next steps in configuration will be done
using your Web browser connected via Ethernet to the 3196RC.
Using a browser to complete Model 3196RC configuration
This section describes the following procedures:
•
Displaying the T-DAC home page (see
“Displaying the T-DAC 3196RC web administration pages”
on
page 41)
•
Setting static connections with DS0 mapping (see
“Configuring the DS0 mapping”
on page 47)
•
Setting the system clocking parameters (see
“Configuring the system clocking parameters”
on page 45)
•
Configuring the IP default gateway (see
“Configuring the default gateway”
on page 44)
•
Configuring the T1/E1 WAN links (see
“Configuring line settings and signaling for E1”
on page 57 or
“Configuring line settings and signaling for T1”
on page 60)
Displaying the T-DAC 3196RC web administration pages
Do the following:
1.
Connect your PCs Ethernet connection to the Ethernet LAN.
2.
Connect the 3196RC’s T-DAC 10/100 Ethernet connection to the Ethernet LAN.
3.
At your PC, open a Web browser session. In your browser’s URL/address field type the IP address of the
Model 3196RC (for example, if the Model 3196RC’s IP address
123.124.221.10
, you would type
123.124.221.10
in the browser’s URL/address field). If you do not have an IP address in your TDAC, refer
to
“Initial configuration through the RS-232 control port”
on page 37.
4.
A login prompt will appear. In the username field type
superuser
then press
<Tab>
to move the cursor to the
Password field
. In the password field type
superuser
then press
<Enter>
.