![background image](http://html1.mh-extra.com/html/patton-electronics/1089-c/1089-c_user-manual_4070257002.webp)
T
TA
AB
BL
LE
E O
OF
F C
CO
ON
NT
TE
EN
NT
TS
S
Section
Page
1.0 Warranty Information .............................................................2
1.1 Radio and TV Interference
1.2 CE Notice
1.3 Service
2.0 General Information...............................................................4
2.1 Features
2.2 Description
3.0 Configuration .........................................................................5
3.1 Configuring the Hardware DIP Switches
3.1.1 Configuration DIP Switch Set “S2”
3.1.2 Configuration DIP Switch Set “S3”
4.0 Installation ...........................................................................10
4.1 Connecting the Twisted Pair Interface
4.2 Connecting the Model 1089/C (V.35) Serial Interface
4.2.1 Connecting the Model 1089/C to a DTE Device
4.2.2 Connecting the Model 1089/C to a DCE Device
4.3 Connecting the Model 1089/D (X.21) Serial Interface
4.3.1 Connecting the Model 1089/D to a DCE or DTE
Device
4.3.2 Opening the Case
4.4 Connecting Power
4.4.1 Universal Power (100 - 240VAC)
4.4.2 120VAC Power (US)
4.4.3 230VAC Power (International)
4.4.4 48VDC Power
5.0 Operation .............................................................................15
5.1 Power-Up
5.2 LED Status Monitors
5.2.1 LED Descriptions Chart
5.3 Test Modes
5.3.1 Overview
5.3.2 Loops and Patterns
5.3.3 Using the V.52 (BER) Test Pattern Generator
Appendix A - Specifications ........................................................26
Appendix B - Factory Replacement Parts and Accessories.......27
Appendix C & D - Interface Pin Assignments.............................28
Appendix E - Transmission Distance Chart................................30
1
1
1..0
0 W
WA
AR
RR
RA
AN
NT
TY
Y IIN
NF
FO
OR
RM
MA
AT
TIIO
ON
N
Patton Electronics
warrants all Model 1089 components to be
free from defects, and will—at our option—repair or replace the prod-
uct should it fail within one year from the first date of shipment.
This warranty is limited to defects in workmanship or materials,
and does not cover customer damage, abuse or unauthorized modifi-
cation. If this product fails or does not perform as warranted, your sole
recourse shall be repair or replacement as described above. Under no
condition shall
Patton Electronics
be liable for any damages incurred
by the use of this product. These damages include, but are not limited
to, the following: lost profits, lost savings and incidental or consequen-
tial damages arising from the use of or inability to use this product.
Patton Electronics
specifically disclaims all other warranties,
expressed or implied, and the installation or use of this product shall
be deemed an acceptance of these terms by the user.
1.1 RADIO AND TV INTERFERENCE
The Model 1089 generates and uses radio frequency energy, and
if not installed and used properly—that is, in strict accordance with the
manufacturer's instructions—may cause interference to radio and tele-
vision reception. The Model 1089 has been tested and found to com-
ply with the limits for a Class A computing device in accordance with
the specifications in Subpart J of Part 15 of FCC rules, which are
designed to provide reasonable protection from such interference in a
commercial installation. However, there is no guarantee that interfer-
ence will not occur in a particular installation. If the Model 1089 does
cause interference to radio or television reception, which can be deter-
mined by disconnecting the unit, the user is encouraged to try to cor-
rect the interference by one or more of the following measures: mov-
ing the computing equipment away from the receiver, re-orienting the
receiving antenna and/or plugging the receiving equipment into a dif-
ferent AC outlet (such that the computing equipment and receiver are
on different branches).
1.2 CE NOTICE
The CE symbol on your Patton Electronics equipment indicates
that it is in compliance with the Electromagnetic Compatibility (EMC)
directive and the Low Voltage Directive (LVD) of the European Union
(EU). A Certificate of Compliance is available by contacting Technical
Support.
2