EN
132
EN
133
The compressor is called power tool in these
safety instructions. Nevertheless the com-
pressor is meant and you must definitely
follow these safety instructions.
Safety Instructions
GENERAL POWER TOOL SAFETY
WARNINGS
WARNING Read all safety warnings,
instructions, illustrations and
specifications provided with this power
tool.
Failure to follow the warnings and
instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for
future reference.
The term “power tool” in the warnings refers
to your mains-operated (corded) power tool o
battery-operated (cordless) power tool.
1 WORK AREA SAFETY
a)
Keep work area clean and well lit.
Clut-
tered or dark areas invite accidents.
b)
Do not operate power tools in explosive
atmospheres, such as in the presence
of flammable liquids, gases or dust.
Power tools create sparks which may ignite
the dust or fumes.
c)
Keep children and bystanders away
while operating a power tool.
Distrac-
tions can cause you to lose control.
2 ELECTRICAL SAFETY
a)
Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools.
Unmodified
plugs and matching outlets will reduce risk
of electric shock.
b)
Avoid body contact with earthed or
grounded surfaces, such as pipes, ra-
diators, ranges and refrigerators.
There
is an increased risk of electric shock if your
body is earthed or grounded.
c)
Do not expose power tools to rain or
wet conditions.
Water entering a power
tool will increase the risk of electric shock.
d)
Do not abuse the cord. Never use the
cord for carrying, pulling or unplugging
the power tool. Keep cord away from
heat, oil, sharp edges or moving parts.
Damaged or entangled cords increase the
risk of electric shock.
e)
When operating a power tool outdoors,
use an extension cord suitable for
outdoor use.
Use of a cord suitable for
outdoor use reduces the risk of electric
shock.
f)
If operating a power tool in a damp
location is unavoidable, use a residual
current device (RCD) protected supply.
Use of an RCD reduces the risk of electric
shock.
3 PERSONAL SAFETY
a)
Stay alert, watch what you are doing
and use common sense when operating
a power tool. Do not use a power tool
while you are tired or under the influ-
ence of drugs, alcohol or medication.
A moment of inattention while operating
power tools may result in serious personal
injury.
b)
Use personal protective equipment.
Always wear eye protection with side
shields, along with hearing protection.
Failure to do so could result in objects
being thrown into your eyes and other pos-
sible serious injuries. Protective equipment
such as dust mask, non-skid safety shoes,
hard hat, or hearing protection used for
appropriate conditions will reduce personal
injuries.
c)
Prevent unintentional starting. Ensure
the switch is in the off-position before
connecting to power source and/or
battery pack, picking up or carrying the
tool.
Carrying power tools with your finger
on the switch or energising power tools
that have the switch on invites accidents.
d)
Do not overreach. Keep proper footing
and balance at all times.
This enables
better control of the power tool in unex-
pected situations.
e)
Dress properly. Do not wear loose
clothing or jewellery. Keep your hair,
clothing and gloves away from moving
parts.
Loose clothes, jewellery or long hair
can be caught in moving parts.
f)
If devices are provided for the connec-
tion of dust extraction and collection
facilities, ensure these are connected
and properly used.
Use of dust collection
can reduce dust-related hazards.
g)
Do not let familiarity gained from fre-
quent use of tools allow you to become
complacent and ignore tool safety prin-
ciples.
A careless action can cause severe
injury within a fraction of a second.
h)
Do not use on a ladder or unstable
support.
Stable footing on a solid surface
enables better control of the tool in unex-
pected situations.
4 POWER TOOL USE AND CARE
a)
Do not exceed the pressure rating of
any component in the system.
All hoses
and fittings must be suitable for use at
the maximum allowable pressure of the
compressor.
b)
Protect material lines and air lines
from damage or puncture.
Keep hose
and power cord away from sharp objects,
chemical spills, oil, solvents, and wet
floors. Hoses must be fitted with a safety
wire for operating pressures above 7 bars.
c)
Check hoses for weak or worn condi-
tion before each use, making certain
all connections are secure.
Do not use
if defect is found. Purchase a new hose
or notify an authorized service centre for
examination or repair.
d)
Release all pressures within the system
slowly.
Dust and debris may be harmful.
e)
Store idle power tools out of the reach
of children and do not allow persons
unfamiliar with the power tool or these
instructions to operate the power tool.
Power tools are dangerous in the hands of
untrained users.
f)
Maintain tools with care.
Follow main-
tenance instructions. Properly maintained
tools are easier to control. Many accidents
are caused by poorly maintained tools.
g)
Check for misalignment or binding of
moving parts, breakage of parts, and
any other condition that may affect the
operation of the tool.
If damaged, have
the tool repaired before using.
h)
Never point any tool toward yourself or
others.
i)
Keep the exterior of the air compres-
sor dry, clean, and free from oil and
grease.
Always use a clean cloth when
cleaning. Never use brake fluids, gasoline,
petroleum-based products, or any strong
solvents to clean the unit. Following this
rule will reduce the risk of deterioration of
the enclosure plastic.
j)
Ensure compatibility of accessories
before using.
k)
Read and understand the operating
manual for any accessories or air tools
before using.
l)
Use the power tool and accessories in
accordance with these instructions,
taking into account the working condi-
tions and the work to be performed.
Use
of the power tool for operations different
from those intended could result in a haz-
ardous situation.
5 SERVICE
a)
Tool service must be performed only
by qualified repair personnel.
Service
or maintenance performed by unqualified
personnel may result in a risk of injury.
b)
Disconnect power supply, open con-
densation drain valve to decompress
tank and allow water to drain, and
allow air compressor to become cool to
the touch before servicing.
Turn pres-
sure regulator knob fully counterclockwise
after shutting off compressor.
c)
When servicing, use only identical
replacement parts.
Follow instructions
in the Maintenance section of this manual.
Use of unauthorized parts or failure to fol-
low Maintenance instructions may create a
risk of injury.