EN
137
Product overview
1
On / off switch
2
Locking lever
3
LED light
4
Tool holder
5
Clamping screw
6
Speed control
7
Main grip
8
Battery
9
Battery release switch
Intended use
The tool is intended for sawing and cutting
wooden materials, plastic, gypsum, non-fer-
rous metals and fastening elements (e.g. nails,
staples). It is also suitable for working soft wall
tiles as well as for dry sanding and scraping
of small surfaces. It is especially suitable for
working close to edges and for flush cutting.
The tool is not intended for commercial use.
Any other use or modification to the tool is
considered as improper use and could cause
considerable dangers.
Installation / Adjustments
Caution!
Before installation make sure the tool is switched off and the battery re-
moved.
SCRAPER
Suitable for: Carpets, coverings
Swing out the locking lever
2
by 180°,
and turn it until you can remove the
clamping screw
5
.
1
Insert the scraper, so that all metal
pins fit in its slots. Fix the clamping
screw
5
by turning the locking lever
2
.
Swing locking lever back to tool.
PLUNGE SAW BLADE
Suitable for: Wood, plastic, plaster-
board, other soft materials
Swing out the locking lever
2
by 180°,
and turn it until you can remove the
clamping screw
5
.
1
Insert the saw blade, so that all metal
pins fit in its slots. Fix the clamping
screw
5
by turning the locking lever
2
.
Swing locking lever back to tool.
2
2
2
2
8
4
5
3
6
1
7
9
1
3.
2.
1.
2.
1.
3.
2
1
3.
2.
1.
2.
1.
3.
