Paton MMA-160P, Руководство по эксплуатации

Страница: 31 / 39

PATON VDI-SERIES PRO DC MMA/TIG/MIG/MAG
-31-
13. DELIVERY SET
1. Welding unit with a power cable 3 m in length
– 1 pcs;
2. Power welding cable with an electrode holder 3 m in length
– 1 pcs;
3. Welding cable with a grounding clamp 3 m in length
– 1 pcs;
4. Shoulder-carry belt
– 1 pcs;
5. Plastic "PATON™" case
– 1 pcs;
6. Operation manual
– 1 pcs;
14. SAFETY INSTRUCTIONS
GENERAL INFORMATION
This device may only be used for the purposes for which it was created. This appliance
is intended for use by persons with the requisite qualifications. It is the responsibility of
the qualified personnel to install, service and repair. Please read this manual carefully
before installing and using this product. Failure to follow the instructions in this manual
may result in serious personal injury, death and damage to the unit itself. Incorrect
installation, maintenance and operation resulting in damage to the device - the
manufacturer is not liable.
INSTRUCTION
Before using this product, please read this manual and use the
instructions in this manual. This instruction manual is a basic piece
of equipment.
USER RESPONSIBILITIES: The user agrees to allow only
persons who: have been acquainted with the basic safety rules, have
been trained in the use of welding equipment and have appropriate
qualifications. They are familiar with the chapter "Safety
Regulations" and the precautionary guidelines in this manual.
THREATS
ELECTRIC SHOCK CAN KILL: Welding devices produce high
voltage. While the machine is connected to the power supply, it is
not allowed to touch the welding handle and the workpiece. All of
these elements form a welding current circuit and may cause
electric shock, so avoid touching them with bare hands and wet or
damaged protective clothing. Protective clothing should not
restrain movements. If possible, it should not be made of synthetic
materials.
Electrocution can be fatal !!!