Paton MMA-160P, Руководство по эксплуатации

Страница: 30 / 39

PATON VDI-SERIES PRO DC MMA/TIG/MIG/MAG
-30-
10. STORAGE
The preserved and packed welding unit can be stored according to State Norm for 5 years
The welding unit should be stored in a dry closed room at an ambient temperature not
lower than 5ºC. In the room, acid vapors and chemically active substances must not be
present.
11. TRANSPORTATION
The packed welding unit can be transported by any means of transport which ensure the
integrity of the unit and compliance of the unit with the shipping rules established for the
specified transport means.
12. SPECIFICATION DATA
WARNING! If the welding unit is rated for a special power supply
voltage, the specification data of the unit are indicated on the
nameplate on the rear panel of the unit. In this case, the electrical outlet
of the power supply system and the power cable of the welding unit
should be selected with consideration for the actual power supply
voltage.
Rated power supply voltage 50/60 Hz, V 230
Power supply voltage range, V
160 … 260
Efficiency coefficient (at the rated current), % 92
Welding current control range, A
8 … 160 A for VDI-160P
10 … 200 A for VDI-200P
12 … 250 A for VDI-250P
Welding current at a load factor of 70 %, for 5
minutes
160 A for VDI-160P
200 A for VDI-200P
250 A for VDI-250P
Welding current at a load factor of 100 %, for 5
minutes
134 A for VDI-160P
167 A for VDI-200P
208 A for VDI-250P
Maximum consumed power, kVA
5.0 … 6.2 kVA for VDI-160P
6.6 … 8.0 kVA for VDI-200P
8.5 … 11.0 kVA for VDI-250P
Normal operating voltage for the manual arc
welding process, V
21 … 28
Normal operating voltage for the argon arc welding
process, V
10 … 18
Normal operating voltage for the semiautomatic arc
welding process, V
12 … 28