Paton MMA-160P, Руководство по эксплуатации

Страница: 13 / 39

PATON VDI-SERIES PRO DC MMA/TIG/MIG/MAG
-13-
2.3. CONNECTION TO A POWER SUPPLY SYSTEM
The commercial welding unit is rated for an input power supply voltage of
230 V -27/+18 %.
WARNING! If the input power supply voltage of the welding unit
exceeds 450 V, the warranty of the manufacturer of the welding unit
will be invalid. Such a condition is possible at large unbalance of phase
voltages in the standard power supply system or if the welding unit is
connected to the power supply system improperly.
The power supply connector, power cable cross-section area, and supply-line fuses should
be selected with consideration for the technical characteristics of the welding unit.
2.4. REQUIREMENTS FOR AN ELECTRICAL OUTLET
WARNING! The parameters of an electrical outlet for the power
supply of the welding unit must correspond to the power supply voltage
and consumption current of the welding unit (see Section 1.1,
"Technical characteristics"). Connect the welding unit to an electrical
outlet that is rated for a three-wire plug with a grounding conductor.
3. MANUAL COVERED-ELECTRODE ARC WELDING PROCESS
(MMA)
3.1. PREPARING THE WELDING UNIT FOR OPERATION
ELECTRODE HOLDER
GROUNDING CLAMP
WORKPIECE
~230V