PATON
VDI-SERIES PRO
DC MMA/TIG/MIG/MAG
-11-
5.
Button for selecting functions for the current welding process and for
switching to the required welding process:
a)
Manual covered-electrode arc welding
(MMA)
b)
Argon arc welding with a no consumable electrode
(TIG)
c)
Gas-shielded semiautomatic arc welding
(MIG/MAG)
6.
Indicator of the operating condition of the welding unit (can blink during
welding):
a)
Continuously lights green when the welding unit is in the operating
mode and in the manual arc welding process.
b)
Continuously lights yellow when the welding unit is in the standby mode
in the manual arc welding process or semiautomatic arc welding process.
c)
Continuously lights red when a fault has occurred or the vending unit is
overheated in any operating mode.
d)
Does not light when the power supply voltage is lower or higher than
the rated voltage.
A
(+)
The bayonet connector socket for connecting:
a)
The electrode cable (or the grounding cable in some cases when special
electrodes are used for welding) for the manual arc welding process
(MMA)
b)
Only the grounding cable for the argon arc welding process
(TIG)
This connector socket is not used in the semiautomatic arc welding process
(MIG/MAG)
B (-)
The bayonet connector socket for connecting:
a)
The grounding cable (or the electrode cable in some cases when special
electrodes are used for welding) for the manual arc welding process
(MMA)
b)
Only the argon gas torch for the argon arc welding process
(TIG)
c)
The grounding cable for the semiautomatic arc welding process
(MIG/MAG)
7.
Push-button switch for switching on and off the welding unit
8.
Indicator of power supply voltage over 260 V (the indicator lights at the
instant of time when 260 V is exceeded)
2. SETTING THE WELDING UNIT INTO OPERATION
WARNING!
Read
Section 14
, "Safety instructions", before setting the
welding unit into operation.
Содержание MMA-160P
Страница 1: ...PATON VDI SERIES PRO DC MMA TIG MIG MAG 1...
