WARRANTY
Dear customer!
PATON INTERNATIONAL thanks you for choosing PATON™ products and guarantees high quality and flawless functioning
of this
product, subject to the rules of its operation.
ATTENTION!!! Before using the equipment, we recommend that you read the operating instructions, and also check
the correctness of filling out the warranty card: the model name of the product you purchased, as well as the serial
number must be identical to the entry in the warranty card. It is not allowed to make any changes and corrections to
the coupon.
WARRANTY POLICY
PATON INTERNATIONAL guarantees the correct operation of the power source provided that the consumer observes the conditions
of operation, storage and transportation.
ATTENTION! There is no free warranty service in case of mechanical damage to the welding machine!
The main warranty period for welding equipment is:
Machine model
EuroMIG
Warranty period
3 years
The main warranty period starts from the date the inverter equipment is sold to the end customer.
During the main warranty period, the seller
undertakes, free of charge for the owner of PATON™ inverter equipment:
-
make diagnostics and identify the cause of the breakdown;
-
to provide units and elements necessary for the repair;
-
to carry out work to replace the failed elements and assemblies;
-
to test the repaired equipment.
The main warranty obligations do not apply to the equipment:
-
with mechanical damage that affected the performance of the device (deformation of the case and parts as a result of falling from a
height or falling on the equipment of heavy objects, falling out of buttons and connectors);
-
with traces of corrosion, which caused a malfunction;
-
out of order due to exposure to its power and electronic elements of abundant moisture;
-
failed due to the accumulation of conductive dust inside (coal dust, metal shavings, etc.);
-
in case of an attempt to independently repair its components and / or replace electronic elements;
-
this equipment, depending on the operating conditions, is recommended once every six months, in order to avoid the breakdown of the device, to
clean the internal elements and assemblies with compressed air, remove the protective cover. Cleaning should be done carefully, keeping the
compressor hose at a sufficient distance to avoid damage to the soldering of the electronic components and mechanical parts.
Also, the main warranty obligations do not apply to out-of-order external elements of equipment subject to physical contact, and related
/ consumables, claims for which are accepted no later than two weeks after the sale:
-
on and off button;
-
knobs for adjusting welding parameters;
-
connectors for connecting cables and sleeves;
-
control connectors;
-
mains cable and mains cable plug;
-
carrying handle, shoulder strap, case, box;
-
electrode holder, ground terminal, torch, welding cables and sleeves.
The seller reserves the right to refuse to provide warranty repairs, or to set the month and year of manufacture of the device as the start
date for the fulfillment of warranty obligations (established by the serial number):
-
if the owner loses the warranty card;
-
in the absence of correct or even any kind of filling in the passport by the seller when selling the device.
The warranty period is extended for the period of warranty service of the device in the service center.
You can find out information about the nearest service center at the place of purchase.
-9 -
PATON
EuroMIG
DC MMA/TIG/MIG/MAG
Содержание EuroMIG
Страница 1: ......
