8 | P a g e
PATON
®
ADI 200 STANDARD TIG/MMA MIG/MAG
1.
Buttons for adjusting the welding current setting and parameters of the welding machine
function;
2.
Digital display showing the current value and welding functions;
3.
Button for adjusting the function of the selected welding method
4.
Button for selecting welding method:
5.
Indicator of the operating condition of the welding unit (can blink during welding):
a)
Continuously lights green when the welding unit in the operating mode and in the
manual arc welding process.
b)
Continuously lights red when a fault has occurred or the welding unit is overheated in
any operating mode.
c)
Does not light when the power supply voltage is lower or higher than the rated voltage.
6.
Socket for supplying gas to the welding torch
7.
Socket for connecting control buttons located on the welding torch
8.
A connector for transmitting signals from the source to the wire feed mechanism
9.
Push-button switch for switching on and off the welding unit
10.
Fitting for connecting a cylinder with protective gas
