36 | P a g e
PATON
®
ADI 200 STANDARD TIG/MMA MIG/MAG
Once on six months,
clean internal parts and components with compressed air when removing the
protective box in order to avoid exit of the unit system on the equipment. Cleaning should be
carried out carefully, keeping the compressor hose at a sufficient distance to avoid damage to the
soldering of electronic components and mechanical parts.
Also, the basic warranty does not apply
to defective external elements of equipment that exposed
to physical contact and the attendant / supplies. Claims on the fallowing items are accepted no later
than two weeks from the date of sale:
1.
Pins on and off,
2.
Knobs of the welding parameters,
3.
Cabling connectors and sleeves,
4.
Connectors management
5.
The power cable and power plug,
6.
Carrying handle, shoulder strap, carrying case,
7.
Electrode holder, earth clamp, burners, bayonet connectors, welding cable, hose.
The Seller reserves the right to refuse
to provide warranty repairs, or set as the date for the
commencement of the warranty a month and year of the machine (set by serial number):
1.
In case of loss of the passport holder,
2.
In the absence of a correct or even any passport fill the seller in the sale of the machine,
3.
In the absence of a serial number on the machine manufacturer reserves the full right to
refuse warranty service.
ATTENTION!
The warranty period is extended for the period of the
warranty service machine to the service center.
There are 5 years of Basic Warranty
on welding inverters series PRO, but
the prerequisite for the implementation of a service through the required
period of time (12 months), in an authorized service center.
15. SAFETY REGULATIONS
GENERAL INFORMATION
This device may only be used for the purposes for which it was created. This appliance is intended
for use by persons with the requisite qualifications. It is the responsibility of the qualified personnel
to install, service and repair. Please read this manual carefully before installing and using this
product. Failure to follow the instructions in this manual may result in serious personal injury, death
and damage to the unit itself. Incorrect installation, maintenance and operation resulting in damage
to the device - the manufacturer is not liable.
