30 | P a g e
PATON
®
ADI 200 STANDARD TIG/MMA MIG/MAG
If it is required to reduce heat input to the weld, as in welding thin parts, the welding voltage should
be decreased by performing the standard setting operations. In this case, voltage pulse parameters
will be adjusted automatically according to the set welding voltage, and the operator can control the
reduction of the heat input, as compared with the heat input at the initial welding current, by
simultaneously varying the voltage pulse amplitude and duty cycle.
The aforementioned parameters should be set differently for different welding processes, depending
on the requirements of the operator.
6. SETTING THE WELDING UNIT
When no button on the front panel of the welding unit is pressed, the digital display of the unit
shows the value of the basic parameter of the current welding process:
1.
Welding current in the manual arc welding process
(MMA)
2.
Welding current in the argon shielded tungsten-arc welding process
(TIG)
3.
Welding voltage in the semiautomatic arc welding process
(MIG/MAG)
The buttons
(1)
on the front panel are responsible for changing the value of the selected function or
basic welding parameter.
Multifunction button
(5)
on the front panel is designed for performing the following functions:
1.
When the button is pressed and released fast, the sequential selection of any function in the
current welding process is provided.
2.
If the button is pressed and held more than 5 s, the sequential selection of any welding
process is provided.
3.
If the button is pressed and held for more than 10 s, the return of the values of the functions
and parameters of the welding unit to the default factory values set for of the current
welding process are provided.
The button
(4)
on the front panel of the multifunction machine is responsible for the following:
1.
The choice of welding method (quick press);
6.1 CHOOSING A LANGUAGE ON THE DEVICE
The following languages are installed in the device: English, Russian.
1.
When the device is turned off, press and hold the "MENU" button, then start the device
with the main switch.
2.
The language change function appears on the main screen. To change the language, press
the "+" or "-" button.
3.
After selecting the appropriate language, wait 2 seconds. , the selected language will be
automatically saved.
4.
Repeat points 1 to 3 to change the language again.
6.2 SWITCHING TO THE REQUIRED FUNCTION
To enter the advanced settings of the device function, keep the button
(3)
pressed for more than
5 seconds. After pressing the button
(3)
, the graphical name of the current function will be shown
on the display. After releasing the button, the display will show the standard value of this function,
which can be increased or decreased using the buttons
(1).
In the situation of fast pressing and
releasing the button
(3)
, you can switch over to the next welding machine functions.
