27 | P a g e
PATON
®
ADI 200 STANDARD TIG/MMA MIG/MAG
Do not forget to provide the supply of protective gas. If you have no experience in setting optimal
gas pressure for welding the specific parts, first set the pressure so that it exceeds the expected
optimal pressure by about
0.2 MPa
. In this mode, the increased pressure will not affect the welding
process and will only induce the increased consumption of protective gas. In the future, fulfill the
general instructions concerning semiautomatic arc welding. For welding with any electrode wire
diameter in the range of
0.6 … 1.2 mm
, set the medium electrode wire feed velocity of
7 … 10
m/min
and the medium welding voltage of about
19 V
. Notwithstanding that these parameters are
not optimal, they are sufficient for welding if the stable and uniform wire feed is provided. In order
to achieve better results, set the optimal welding voltage, by buttons 3, and specified electrode wire
feed velocity according to the general instructions on semiautomatic arc welding.
Remember that the parameters to be set are different for different welding processes.
If required, perform the additional functions specified for the semiautomatic arc welding process
(see Section 6.1).
