26 | P a g e
PATON
®
ADI 200 STANDARD TIG/MMA MIG/MAG
16.
Using the button
(1)
on the wire feeder, we can increase the wire feed speed to the
maximum value to quickly pass the wire through the
MIG/MAG
holder. Pay special
attention to the strength of the brake clamp of the reel, the spool should be minimum,
necessarily clamped and should easily spin, but it should not turn.
17.
Switch the button
(4)
in the welding machine to the
MIG/MAG
welding position, if the
desired welding method has been skipped, press the button
(4)
again - the methods are
switched over and over again
18.
Check correct shielding gas flow using the button
(4)
on the "Gas Test" feeder
19.
By using the button
(1)
in the welding machine, we can adjust the welding voltage and the
value of additional function of the welding machine.
20.
By using the button
(3)
in the welding machine we can choose its functions to adjust using
button
(1)
in welding machine.
21.
By using the buttons
(3)
in the wire feeder unit, we can adjust the speed of wire and the
value of additional function of the wire feeder unit.
22.
Using the buttons
(6)
in the wire feeder unit, we can choose its function to adjust using
button
(3)
in wire feeder unit.
23.
The device is ready for use.
Enjoy Your work.
If required, perform the additional functions specified for the semiautomatic arc welding process
(see Section 6.1).
