28
29
Wall mount Signal Tower Instruction Manual
7. Before Use
Item
Description
Default Value
Input Range
Input
Setting Method
Select how to configure the IP address for this
product.
Set manually
–
Required
IP address
Enter the IP address of this product.
192.168.10.1
IP address
format
Required
Subnet Mask
Enter the subnet mask of this product.
255.255.255.0
IP address
format
Required
Default Gateway
Enter the default gateway.
0.0.0.0
IP address
format
Required
Host name
Enter the product's host name.
we
Maximum 63
characters
*
Required
7.4.
Setting Up Product Network Settings
･
To use this product, the network settings must be configured.
･
The default IP address is 192.168.10.1.
CAUTION
When IP address configuration is set to "Automatic Settings", and access to the DHCP server is unavailable, the product
starts up with the factory default network settings.
With the "Automatic Settings" option, the product restarts with the DHCP function enabled.
After changing the IP address, to reconnect to the product change the network settings on your computer as required.
From the "Main unit settings" tab, click
"Network settings" to enter the "Network
settings" screen.
❶
Enter the "IP address", "Subnet Mask", and
"Default gateway".
❸
Select the "Setting method".
❷
･
To specify a fixed IP address, select "Set
manually".
･
To obtain an IP address automatically from the
DHCP server, select "Obtain automatically".
･
Enter the settings in accordance with the network
environment in which this product is used.
* If the "Setting Method" is "Obtain automatically",
input is disabled.
Click "Confirm" to apply the defined settings.
❺
* After the settings are applied, the product is
automatically restarted.
* You can register up to 63 characters, including alphanumeric characters, "- (hyphen)" and ". (period)".
Enter the product's host name.
❹
Point
●
When "Obtain automatically" is selected, the host name is notified to the DHCP server.
❹
❶
❸
❺
❷