USB Controlled Multi-color Signal Beacon User Manual
17
6
Device setup and installation
6.1
Mounting directions
Warning
◇
Be sure to turn off the USB power supply before performing any installation or
maintenance work. Failure to follow this instruction may result in electric shock or
burning of the internal circuit.
Caution
◇
Do not touch the connector of the USB and the internal LED. Failure to follow this
instruction may damage the product.
◇
Do not apply excessive force on the connector while connected to a USB cable.
Doing so may damage the product.
◇
Do not apply excessive force on the product. Doing so may damage the product.
◇
When connecting the product to a PC, be sure to connect the product directly to the
PC without the use of USB hubs, Using USB hubs may cause unstable connection
and improper operation of the product.
◇
Remove water and dirt from the main unit before starting work. Do not work with wet
hands. If water or dirt gets inside the product, it may cause a malfunction.
◇
Check the contact surface between the glove, case, and the O-rings for foreign
matter such as dust and sand, and if there is foreign matter, wipe it off with a soft, dry
cloth. Waterproof performance may deteriorate due to adhesion of foreign matter.
◇
To ensure waterproof performance, check that there are no cracks or scratches on
the O-ring.
Note
◇
Use a USB cable that is 3m or shorter.
◇
The Type-C Connector of the USB cable you are connecting should follow the specifications
noted on the right diagram.
