10
LA6 Signal Tower Complete Operation Manual
4. Mounting Direction
WARNING
•
The product should be turned off and the power supply disconnected prior to installation. Failure to comply may
result in electric shock.
CAUTION
• The clamping surface should be sufficient enough to tolerate the weight and surface of the product. Do not use the product
in a place where vibrations exceeds the specifications. Failure to comply may result in the product detaching and falling,
causing injury to passers-by, etc.
• Only install the signal tower in an upright or inverted position. Failure to comply may result in the product detaching and
falling, causing injury to passers-by, etc.
• Use a soft cloth, etc., dampened with water to wipe the main unit. If wiped with chemicals outside water (thinner, benzine,
gasoline, oil, etc.), product damage may occur.
• Do not disassemble this product beyond it’s usable parts (refer to “3.2 Part Names and Outer Appearance” on page 7).
Failure to comply may result in product breakage due to disassembly.
[ D DC24V Type
]
• This equipment complies with FCC regulation part 15 for class A digital products, and applies to the following restrictions.
These restrictions are limited to cases where this equipment is operated in a business district, and it is designed to take the
relevant protective measures against electromagnetic noise hindrance.
• This product must not be used in residential areas.
1
Check the installation location for the product before mounting
Note
• Check whether it interferes with any other objects.
• Check whether wiring can be easily done.
• Check to be sure the USB Cover can be opened and closed.
• Check whether the alarm direction is correctly suitable.
(B: Flashing/Alarm Type)
