Patlite BK-24 Скачать руководство пользователя страница 1

C95100113

4232-B

Front side

Rear side

 BK

Outside contact

Outside contact

BK-24

Max 20A/ 5ms 

BK-100

None

6mA

12V

(15V)

  Each CH

 

 No-voltage contact circuit

 ■

Wiring example

  ( ) : BK-24

  COM

 BK

6mA

12V

(15V)

  Each CH

  NPN open collector circuit

Current capacity

 Table2.Inrush current and Fuse

 Table1.CH circuit

 Table3.Contact capacity of CH

Apply a voltage displayed below 
‘POWER SUPPLY’.And, in case of 
Type BK-24, connect - terminal of 
power supply to 0V

Power supply

Fuse

See Table2

T-06B0152
T-0710139
T-0710140

Withstand voltage

Leakage current

ON voltage(Vsat)

10mA or higher

DC20V or higher

0.1mA or lower

1V or lower

  ( ) : BK-24

  COM

BK - 24 A  - J

Model

Inrush current

Fuse

125V 1A

125V 0.5A

250V 0.5A

BK-220

None

(

b

)

(

c

)

(

a

)

□110  mm

+1.0 
-0

(148mm)

COM

CH1

CH2

CH3

CH4

CH5

CH6

CH7

CH8

Wiring when NPN 

transistor is used

Waterproofing rubber for 

the slot

Card slot

Front cover

Terminal screw

M3X6

Case

Apply a voltage for the signal line.Failure 

to do so may be damaged to the product.

We thank you for purchasing PATLITE Audible Alarm.  Before you start using the product, 
please read this instruction manual carefully to use the product correctly. Please store this 
document  in  a  safe  place.  Be  sure  to  read  this  document  again  when  you  are  about  to 
perform tasks such as maintenance and repair.
And if you have any questions, contact a branch office or the technical support printed on 
the last page.

Instruction Manual

Audible Alarm

TYPE : BK

The  precautions  which  must  be  observed  to  prevent  damage  to  the  person  using  the 
product, to people around it, or to property are described in a manner shown below

The seriousness of injury or damage caused by ignoring the indication and using the 

product  in  a  wrong  way  is  categorized  with  the  indications  below  and  descriptions  are 
added to each of them

Warning

The sections with this indication contain "items which could
cause death or serious injury" if ignored.

The sections with this indication contain "items which could
cause injury or property damage only" if ignored.

Caution

Safety Precautions

Be sure to turn the power off before wiring or installing the product. Failure to do 

    so may cause  electric shock.

Do not disassemble or modify the product.There is a risk of fire,electrical shock

   etc.For repair, check etc of inside the product, please inquire to each sales office 
   or technical consultation service written in the last page. 

Take care to perform wiring correctly. If the wiring in incorrect, internal circuit may

    be damaged by fire, and it may also be a cause of fire.

As for the power source, be sure to use this product within the allowable range

    of voltage. Failure to do so may be a cause of fire or damage to the product.

Be sure to let specialists perform installation task which requires construction work.

    Failure to do so may cause electric shock, fire, or falling.

To protect power source circuit and internal circuit of the product,

    be sure to install external fuse.

Failures caused by using the product in ways not observing the Warnings and Cautions, 
by disassembling or converting the product, or by natural disaster are not covered under 
warranty.  And  do  not  use  the  product  in  ways  other  than  the  ways  described  in  this 
document.

Use the product in an environment where there is no electromagnetic or inductive 

    noise. Speakers are known to generate noise.

Use the product in an environment where there is no corrosive gas.

   Failure to do so may cause malfunction.

Before you start working on the product, discharge static electricity

 

from your body. By touching another grounded metal part with bare hand,

    the static electricity can be discharged.

Perform fitting of each part at a recommended torque value.

Pay attention not to lose the parts such as the front cover, Terminal cover etc.

   which are to be detached at performing work.

When the product is used for security purposes in which safety is emphasized, 

   be sure to perform daily maintenance, and design a system which is capable 
   of tackling the occurrence of unlikely event such as malfunctioning or failure.

Do not use it at the place where vibration exists that is exceeding 

   the specification.There is a risk of damage and/or falling of the main body.

Do not use the product as fire alarm.

1. Cautions Which Must Be Observed for Safety Use

2. Model Indicating Format

Normal-rated voltage

  

24 : 12-24V

 

DC

   100

100

 AC

   220

220V AC

Sound Chart type

    A

Type A

    C

Type C

 

    D

Type D

    E

Type E

Body color

 

J : Light gray

 

K : Dark gray

Warning

Caution

Other Precautions

Mounting screw for front 

cover (M3X6)

Sound group
Selection switch

Terminal cover

SD card

(Model: SDV-128P  Sold separately)

* PATLITE Corporation is a member of  

the SD Card Association

Mounting hardware

(attachments)

4. How to Install

Mounting surface 
(board thickness: 1mm - 10mm)

Before wiring the product, remove the terminal cover. And after the completion of the wiring 
attach the terminal cover.

For the external contact of CH, use no-voltage contact circuit such as relay switch 

  or open collector circuit (NPN type). As for the contact capacity, see the table 1 to 3.

The terminal screws should be fastened with the recommended fastening 

  torque (0.3N

m). 

5. How to Perform Wiring

Before switching on the power supply, confirm that the wiring is correctly performed.

For countermeasure of noise, it is recommended to perform wiring as short as possible, and to use

   shielded wires. In addition, if a signal line is passing along high voltage cables or its wiring is located
   at the place likely to receive induction noise, there is a risk of malfunction by the effort of noise.

If a no-voltage contact such as a relay or a switch etc. is used for power supply line, select the 

   contact for which rush current is considered.If capacity is insufficient, it will become a cause of
   welding(deposition) of the contact and/or malfunction.

The use of M3 ring terminals with insulating coating is recommended for the wiring of terminal block

  to prevent disconnection of wires.

Be sure to turn the power off before you start wiring. Failure to do so may cause electric shock.

Be careful not to make a mistake in wiring. Failure to do so may cause damage to the internal

   circuit by fire, and it may cause fire.

To  protect  the  power  source  circuit  and  the  internal  circuit  of  the  product,  be  sure  to  install  an 

external fuse.

The  terminal  screws  should  be  fastened  with  the  recommended  fastening  torque  (0.3N

m). 

Failure to do so may

 

cause short circuit due to disconnection of wire, and damage to the product.

6-1 Opening and Closing the Front Cover

 

Open  or  close  the  front  cover  according  to  the  procedure  shown  below  when 

performing tasks such as adjusting the volume of the sound or selecting the tone color 
group.

 Remove the mounting screw (M3X6) for the front cover.

 Push the lower front cover section (part A in the figure on the right) 

     lightly with finger to slide it downward.

 When a SD card is to be used, remove the waterproofing rubber for the slot.

 After completing tasks, attach the parts removed in the procedure from 

 to 

 

 

in the opposite order.

(Recommended fastening torque for the mounting screw: 0.3N

m)

6. How to Use the Product

Waterproofing 

rubber for the slot

Volume control

Mounting screw 

for front cover 

(M3X6)

Front cover

Card slot

Sound group
selection switch

Warning

Other Precautions

Caution

6-1 Opening and Closing the Front Cover

 

Open  or  close  the  front  cover  according  to  the  procedure  shown  below 

when performing tasks such as adjusting the volume of the sound or selecting 
the sound group.

 Remove the mounting screw (M3X6) for the front cover.

 Push the lower front cover section (part A in the figure on the right) 

     lightly with finger to slide it downward.

 When a SD card is to be used, remove the waterproofing rubber 

    for the slot.

 After completing tasks, attach the parts removed in the procedure 

   from 

 to 

③ 

in the opposite order.

  (Recommended fastening torque for the mounting screw: 0.3N

m)

6. How to Use the Product

Waterproofing 

rubber for the slot

Volume control

Mounting screw 

for front cover 

(M3X6)

Front cover

Card slot

Sound group
selection switch

Make sure that there is no misalignment with the sound group

   selection switch when selecting.

 

If there is misalignment as shown in the figure on the right, the 

 

sound group selected may not play.

6-2. Selecting a Sound Group

 

Use  the  sound  group  selection  switch  to  select  a  group  from  the  16 

types from A to P. Use a flat-blade screwdriver with the blade thickness 
of  1.0mm  or  thinner  for  turning  the  switch.  (Factory  default  setting: 
Sound group A)

Sound group A to H

 

By bit input, a sound is played which corresponds to each Sound Group.Regarding the operation, 

  refer to “6-5-1.Bit input”. In addition, Sounds can be freely combined by utilizing a SD card 
  in the case of the group H.Refer to “6-3.How to Combine Sounds”. 

Sound group I to O

   

A sound “5.Rapid Hi-Lo” is played.So, use it for confirming operation and at sound volume adjustment.

Sound group P

  

By binary input, a sound is played which corresponds to Sound list.Regarding the operation, 

  refer to “6-5-2.Binary input”.

1mm

Attach the waterproofing rubber for the slot securely. Failure to do so may weaken

  the product's resistance

 

to water and dust.

Fasten the mounting screw for front cover with the recommended fastening torque. 

  In places where vibrations occur, the front cover may fall or the product may be damaged.

Other Precautions

Other Precautions

The vibration sound may occur when a mounting surface resonates depending on 

   the material, thickness of a mounting surface or the volume of products.

Information

Author 13:BEETHOVEN VAN LUDWIG 14:BADARZEWSKA BARANOWSKA TEKLA 15:BACH JOHANN SEBASTIAN
    16:SCOTT LADY JOHN DOUGLAS 17・18・21・25・28・29:TRADITIONAL 19・27:PD 
       20:FOSTER STEPHEN COLLINS 22:Song authorized by the Ministry of Education  
       23:WERNER HEINRICH (DE 2) 24:STEWART JOHN C26:MOZART WOLFGANG AMADEUS 30:BLANTER MATVEJ ISAAKOVICH 
       31:WORK HENRY CLAY 32:SCHUBERT FRANZ  

Author 13:CREWE BOB 14:CARPENTER RICHARD LYNN 15:JOPLIN SCOTT 16:CARRELL JAMES P
       17:Kouichi Sugiyama 18:WILSHAW MICHAEL 19:PACHELBEL JOHANN 20:Ijichi Hiromasa 
       21:Hiroshi Miyagawa 22:Takeo Watanabe 23,30:Tetsuro Oda 24:CONTI BILL 25:WARREN DIANE EVE 
       26:Yuka Kawamura 27:KAN 28:Masahiro Andoh 29:Totasu Matsumoto 31:Tatsuya Hirakawa 
       32:Yumi Matsutoya     

 Sound groups

   

Sound Chart type A (BK-

A)

 

 Sound List

 Sound groups

Sound Chart type C (BK-

C)

 

 Sound List

Author 11:New Funky Sueyoshi 12・17:Yumi Matsutoya 13:Ami Ozaki 14:Tetsuji Hayashi 15:Tatsuro Yamashita 
       16:Kazumasa Oda 18:Maria Takeuchi 19:HILL MILDRED J 20:CHURCHILL FRANK E 
       21・22・27・29・30・31・32:TRADITIONAL 23:Nobuyoshi Koshibe 24:Takeshi Shibuya 25:SCHUBERT FRANZ
       26:MARKS JOHN D 28:American folk song

 

 Sound groups

Sound Chart type D (BK-

D)

 

 Sound List

CH 4

CH 3

Silent Lakeside

Grandfather’s Clock

Yelp (rapid siren)

Daydream Believer

Rapid Hi-Lo

Rapid Hi-Lo

CH 6

CH 5

Mary had a little Lamb Beep (slow intermittent horn)

The camptown Races

CH 2

Stutter (rapid intermittent horn)

Symphony No.40

CH 8

CH 7

CH 3
CH 4

CH 1

CH 8

CH 5
CH 6

CH 2

CH 7

Holdiridia

Chime

Daydream Believer

Ave Maria

Mary had a little Lamb

The camptown Races

Cuckoo

Blacksmith in the village

Silent Lakeside

Daydream Believer

Minuet

Amaryllis

Grandfather’s Clock Romance De Amour

Symphony No.40

Ave Maria

The camptown Races

Call sign

Mountain musician

London bridge is falling down

Romance De Amour

Bell (clear highpitched bell)

Chime

Synthesized Piano

Chime

On the Avignon bridge

I~O

P

S Bell

Petrouchka

Yelp (rapid siren)

Synthesized Melody

Synthesized Piano

Call sign

Synthesized Bell

Synthesized Bell

London bridge is falling down

The sound 5."Rapid

Hi-Lo"

32 sounds of the

Sound 01~32 are

playable by using
   CH 1~CH 6.

(Binary input)

Mary had a little Lamb

Petrouchka

Mountain musician

Synthesized Bell

Synthesized Piano

Melody Chime

Cuckoo

CH 1

Group

Holdiridia

Bell (clear highpitched bell)

Group

Melody Chime

Synthesized Piano

Call sign

Minuet

Annie Laurie

London bridge is falling down

Maiden's Prayer

Fur Elise

Synthesized Bell

Call sign

Group

Synthesized Bell

Chime

Call sign

The Entertainer

Amazing Grace

Amairono Kamino Otome

Top of the World

Can't Take My Eyes off of You

Truth

Call sign

Chime

Yozorano Mukou

Uchuusenkan Yamato

CH 1

Group

S Bell

Truth

Amairono Kamino Otome

The sound 5."Rapid

Hi-Lo"

32 sounds of the

Sound 01~32 are

playable by using
   CH 1~CH 6.

(Binary input)

Les Champs-Elysees

Odoru Ponpokorin

I~O

P

Canon

Odoru Ponpokorin

Gonna Fly Now(Theme for "Rocky")

Haruyo Koi

Chime

Call sign

Call sign

Call sign

Call sign

Truth

Rara Sanshain

Gattsudaze

Can't Take My Eyes off of You

Chime

Chime

Chime

Makenaide

I Don't Want to Miss a Thing

Imasugu Kisu Mi

Amairono Kamino Otome

Yozorano Mukou

Haruyo Koi

Makenaide

Aiwa Katsu

Uchuusenkan Yamato

Gattsudaze

Canon

Rara Sanshain

Uchuusenkan Yamato

Oshiete

Top of the World

CH 7

Les Champs-Elysees

Chime

Gonna Fly Now(Theme for "Rocky")

CH 1

CH 8

CH 5
CH 6

CH 2

CH 8

CH 7

CH 3
CH 4

Beep (slow intermittent horn)

Odoru Ponpokorin

Rara Sanshain

CH 2

Aiwa Katsu

Stutter (rapid intermittent horn)

CH 4

CH 3

Aiwa Katsu

Imasugu Kisu Mi

Les Champs-Elysees

Synthesized Melody

Synthesized Piano

Amazing Grace

CH 6

CH 5

She Wore a Yellow Ribbon

When the Saints Go Marching In

Yankee Doodle

Iro Howaitoburendo

Rapid Hi-Lo

Synthesized Piano

Saafu Tengoku Sukii Tengoku

Doyoubino Koibito

Hi Ho

CH 2

I've been working on the Railroad

Konnako Irukana

CH 8

CH 7

CH 3
CH 4

CH 4

CH 3

CH 6

CH 5

CH 1

CH 8

CH 5
CH 6

CH 2

CH 7

Akino Kehai

Saafu Tengoku Sukii Tengoku

Konnako Irukana

Hi Ho

Happy Birthday

Hi Ho

I've been working on the Railroad

Bear Song

Yellow Rose of Texas

When the Saints Go Marching In

Wiegenlied

She Wore a Yellow Ribbon

Yellow Rose of Texas

Runner

Oh My Darling Clementine

Yankee Doodle

Iro Howaitoburendo

Rudolph the Red-nosed Reindeer

Yankee Doodle

Londonderry Air

When the Saints Go Marching In

Beep (slow intermittent horn)

Runner

Chime

Wiegenlied

Toys Go Cha Cha Cha

I~O

P

Bell (clear highpitched bell)

Londonderry Air

Stutter (rapid intermittent horn)

Yelp (rapid siren)

Chime

Mamotte Agetai

Call sign

Call sign

Saafu Tengoku Sukii Tengoku

The sound 5."Rapid

Hi-Lo"

32 sounds of the

Sound 01~32 are

playable by using 
   CH 1~CH 6.

(Binary input)

Iro Howaitoburendo

Yankee Doodle

Oh My Darling Clementine

Call sign

Chime

Synthesized Bell

I've been working on the Railroad

CH 1

Group

Oribiao Kikinagara

She Wore a Yellow Ribbon

Group

Melody Chime

Chime

Iro Howaitoburendo

Oribiao Kikinagara

A September

Doyoubino Koibito

Mamotte Agetai

Runner

Call sign

Install the product according to the procedure below.

 Create mounting holes on a mounting surface (board thickness: 1mm - 10mm)

     where there is enough space for the mounting hardware. (See the mounting dimensions diagram)

 (a) Insert the product from the front of the mounting surface. 

     (b) Attach the mounting hardware which comes with the product to the holes on the side of the product. 
     (c) Then fasten the screws of the mounting hardware. (Recommended fastening torque: 0.7

±

0.1N

m)

 Confirm that the product and the mounting hardware are installed properly.

17

Amairono Kamino Otome

25

I Don't Want to Miss a Thing

18

Les Champs-Elysees

01

Beep (slow intermittent horn)

09

S Bell

02

Stutter (rapid intermittent horn)

10 Synthesized Melody

26

Yozorano Mukou

03

Bell (clear highpitched bell)

11

Chime

19

Canon

27

Aiwa Katsu

04

Yelp (rapid siren)

12

Call sign

20

Rara Sanshain

28

Truth

07 Synthesized Piano 15

The Entertainer

08

Synthesized Bell

16

Amazing Grace

22

Oshiete

30

14

Top of the World

21

Uchuusenkan Yamato

24

Gonna Fly Now(Theme for "Rocky")

Odoru Ponpokorin

23

Makenaide

32

Haruyo Koi

31

Imasugu Kisu Mi

05

Rapid Hi-Lo

13

Can't Take My Eyes off of You

06

Melody Chime

29

Gattsudaze

06

Melody Chime

29

Yellow Rose of Texas

05

Rapid Hi-Lo

13 Oribiao Kikinagara

Yankee Doodle

23

Toys Go Cha Cha Cha

32

Londonderry Air

31

When the Saints Go Marching In

22

Bear Song

30

14

A September

21

I've been working on the Railroad

24

Konnako Irukana

08

Synthesized Bell

16

Akino Kehai

07 Synthesized Piano 15 Doyoubino Koibito

20

Hi Ho

28

Oh My Darling Clementine

04

Yelp (rapid siren)

12

Mamotte Agetai

26

Rudolph the Red-nosed Reindeer

03

Bell (clear highpitched bell)

11

Runner

19

Happy Birthday

27

She Wore a Yellow Ribbon

02

Stutter (rapid intermittent horn)

10

Call sign

01

Beep (slow intermittent horn)

09

Chime

17

Saafu Tengoku Sukii Tengoku

25

Wiegenlied

18 Iro Howaitoburendo

3. Part Names

Mounting dimensions diagram

Be sure to turn the power off before installing the product. 

   Failure to do so may cause electric shock.

Be sure to let specialists perform installation task which requires construction work.

    Failure to do so may cause electric shock, fire, or falling.

Secure a enough space in which the mounting hardware can also be installed when choosing

  a mounting surface.

Install the product on a flat surface without bumps and dips. Failure to do so may weaken its 

  resistance to water and dust.

To prevent the product from falling in places where vibration may be generated, apply thread 

   locking adhesive or the like, and perform periodic checking of the tightness of the mounting hardware.

When mounting it at a high place, choose the place where a foothold exists for facilitating repair work.

If it used under the connected state to the power supply, then provide a switch which can easily 

  cut off power supply in proximity to the main body, for the safety purpose.

Choose a location for the mounting surface where it has enough strength to support

  

 

the weight of the product, and where

 

there is less vibration. Failure to do so may be

    the cause of injury or damage to the product.

Be sure to use both pieces of mounting hardware, and fasten them with the

   recommended fastening torque. Failure to do so 

m

ay be the cause of injury 

   or damage to the product.

Mounting 
hardware

Warning

Caution

Other Precautions

Volume control

06

Melody Chime

29 Romance De Amour

05

Rapid Hi-Lo

13

Fur Elise

Petrouchka

23

On the Avignon bridge

32

Ave Maria

31 Grandfather’s Clock

22

Blacksmith in the village

30

14

Maiden's Prayer

21

Cuckoo

24 Daydream Believer

08

Synthesized Bell

16

Annie Laurie

07 Synthesized Piano 15

Minuet

20

The camptown Races

28 Mountain musician

04

Yelp (rapid siren)

12

Call sign

26

Symphony No.40

03

Bell (clear highpitched bell)

11

Chime

19

Mary had a little Lamb

27

Silent Lakeside

02

Stutter (rapid intermittent horn)

10 Synthesized Melody

01

Beep (slow intermittent horn)

09

S Bell

17

London bridge is falling down

25

Amaryllis

18

Holdiridia

A

Отзывы: