pathway Pathport PWPP HH P1 XLR5F, Руководство пользователя

Страница: 60 / 62

October 2021
53
PWPP HH P1 - Manual
Start Addr : 1
EDIT ESC
→
Start Addr : 1
UP DOWN NEXT
Use the UP or DOWN buttons to change the DMX start address of the device, and pressing NEXT allows the new address
to be saved. Once saved, press ESC to return to the device list.
To cycle to the next RDM device, press the NEXT button and repeat the above steps to edit the DMX start address if needed.
TEST DMX OUTPUT
This menu is only available when the DMX port is configured as an output . Use this menu to test the DMX output of your
network on one or all slots in the currently configured output Universe.
Test DMX Output
NEXT OK ESC
Press OK to enter the menu. The next screen will show “ Chan ” with a flashing “ 1 ”.
Chan 1
UP DOWN NEXT
Use the UP or DOWN buttons to select the desired DMX slot to test. To select ALL slots, press DOWN once. “Chan All” will
be shown. Press NEXT .
Chan 1 Lev 0
UP FADE ESC
“Lev 0” will then appear, indicating DMX Level . Press and hold the UP button to increase the DMX level for the selected
slot(s) The longer you hold the button, the faster the level will ramp up. Release the button to stop at the current value.
Chan 1 Lev 192
UP FADE ESC
Once the level reaches 255, continuing to press or hold UP will drop to zero and then begin ramping up again.
Pressing the FADE button will cause the gateway to automatically fade the selected slot from zero to full, then back down
to zero again. Press the STOP button to stop the fade at the current DMX level, at which point you may press FADE again
to resume, or press UP to ramp up manually.
Chan 1 Lev 192
STOP ESC
The FADE function will continue fading the DMX slot level up and down until the user presses STOP , ESC or the 30-second
timeout expires.