pathway Pathport PWPP HH P1 XLR5F, Руководство пользователя

Страница: 55 / 62

PWPP HH P1 - Manual October 2021
48
USING THE FRONT PANEL UI
With the main screen (above) showing on the LCD, press any of the buttons twice. The first button press will illuminate the
backlight, while the second press will enter the main menu. The first menu item shown is the
Gateway Config menu.
PWPP HH Office
Univ1 IdleOut
→
Gateway Config
NEXT OK ESC
Press the
NEXT
button to cycle through menu items. Press the
OK
button to enter the currently displayed menu item to either
enter a submenu or edit a property value.
Press the ESC button to return to the previous/higher-level menu. Keep pressing the ESC button to exit out of the menu
entirely and return to the main screen.
To edit property values, press the
OK
button to begin editing that property. Press the
UP
or
DOWN
buttons to scroll through
the options for that property, and then press the
NEXT
button. Finally, press the
SAVE
button to accept any changes made,
or press the
ESC
button to return without making changes.
The menu will time out after 30 seconds and return to the main screen, without saving any changes.
MENUS
GATEWAY CONFIG
Gateway Config
NEXT OK ESC
This menu allows the user to Factory Default the device, allow the use of Unsecured RX protocols, setting the Network DMX
TX Protocol, and setting which RX Protocols to receive (Pathport, ShowNet, ETC Net2, Art-Net, E1.31 sACN, and Pathway
ssACN).
Menu Item Description
Factory Default
Returns to the device to factory settings.
Disabled (default) : Factory Default will not be performed
Enabled : After saving this property, the device will be reset to factory settings.
Allow UnsecureRX
Allows receiving of unsecured Network DMX Protocols.
Disabled (default) : Unsecured Network Protocols are not allowed.
Accept Risk : After saving this property, Unsecured Network Protocols are allowed.
Once saved, this property will be shown as Enabled .