Pathway connectivity solutions Pathport QUATTRO 63 Series, Руководство пользователя

Страница: 53 / 70

January 2021
46
Pathport® QUATTRO - 63XX - Manual
sACN TRANSMIT PRIORITY
When E1.31 sACN or Pathway ssACN is put on the network, it will be tagged with a priority level. At output ports, multiple
sources will HTP levels if their priorities match, otherwise they will arbitrate. The default TX priority per Port is 100. Valid
priorities are between 1 and 200 where 200 is the highest priority possible.
This property is only visible if the above property sACN Transmit Priority Slot is set to 0 (disabled)
SIGNAL LOSS
HOLD TIME (s)
If the DMX512 source ceases, the Network DMX will continue to be refreshed to the network using the levels from the last
packet the gateway received until this timer expires.
ADVANCED PROPERTIES
CCI ACTION
Hardware-refreshed OCTO (642X)/QUATTRO (632X)/6824 Models only. Choose the function of the CCI input, if
desired. When the Contact Closure Interface is closed (activated), the chosen action will be performed on the selected port.
No Action:
No action is taken.
DMX Force Hold: Activates DMX Force Hold on the specified port, as described above. When the CCI input is opened,
the DMX Force Hold will be deactivated.
RDM Pause:
Activates RDM Pause on the specified port, as described above. No effect if used on an Input port.