background image

Quick Start Guide 

Installing the Unit 

Guidance Screen 
 

Mount to the windscreen using suction 
mount and ram arm, or unscrew the 
ball from the suction mount and use 
this for a permanent fixture.

 

Warning

 

– Please disconnect the unit from the power 

supply, if you need to jump start your vehicle. 

PWdoc0007 rev.2.3 

12v DC Plug

 

 
Plug into 3 pin socket 
on vehicle. (If hard 
wiring do not remove 
the fuse).

 

Magnetic Receiver

 

 
Install on the roof of the 
vehicle with arrow 
pointing to the front (if 
the roof is not metal use 
the roof mount plate 
supplied).

 

Warranty Void if suction mount fails !!

 - Its is advised that the suction mount 

is removed from the windscreen when the unit is not in operation and reat-
tached on a day to day basis. 

For a more permanent fixing please detach the ram ball from the suction mount 
and secure down in the vehicle.

 

Brightness 

Power On/Off 

Touch Screen 

Содержание Advance

Страница 1: ... pin socket on vehicle If hard wiring do not remove the fuse Magnetic Receiver Install on the roof of the vehicle with arrow pointing to the front if the roof is not metal use the roof mount plate supplied Warranty Void if suction mount fails Its is advised that the suction mount is removed from the windscreen when the unit is not in operation and reat tached on a day to day basis For a more perma...

Страница 2: ...essed via Setup Save Load Profile Run Initial Setup Wizard Starting a Job Previous Next Home Information Cancel Confirm 1 Press Start Job 5 Enter the working Width select the Guidance Mode and press Confirm 2 Select New Job and Confirm If Recording NO the unit will go to step 5 3 Enter Farm Field and Confirm 4 Check edit recording details and Confirm 6 Guidance screen opens ready to begin job ...

Страница 3: ... automatically close and save the boundary map displaying the field shape and area size in the mini map If the boundary doesn t close press the Close Boundary button N B During the boundary run the boundary recording can be paused and restarted using the Start Pause Boundary button if there is a need to drive around obstacles To do a new boundary map redo steps 1 to 3 Start Pause Boundary Close Bo...

Страница 4: ...de line 2 At the beginning of a straight run press the Grid area to set point A 3 Drive to the end of the run and press the Grid area to set B The guidance line will appear ready for guidance 4 If working the headland pass continue around then line up to the set AB line and use the guidance to work the inner areas of the field 5 When turning in the headland the next AB line will appear Grid area G...

Отзывы: