PASI GEA RM1 1.0, Руководство пользователя

Страница: 63 / 71

GEA RM1 59
Description of the Gea RM1-PC program
In the System window the operator can decide whether to always use the full view of a
table or if, when possible, to use the simplified view as the first choice. In any case, the
operator can switch from the simplified view to the full view by pressing the appropriate
button/key. If the simplified view is not allowed due to the absence of the required
symmetries, the button/key will not be activated.
Within the table it is possible to insert or change the values of the geometric positions of
the electrodes, the value of K will be recalculated if required by the type of measurement
used. It is not possible to enter or change the measured electrical parameters.
The Details button allows you to view information related to the entire measurement
session. In particular, for automatic measurements in this section are reported the input
values that have been entered by the operator and needed by the Gea RM1 system to
calculate the position of the electrodes when the automatic session has to be performed.
The Save and Save as ... buttons allow you to save the table on your PC's hard disk,
possibly changing its name and format.
By displaying an automatic table that has been totally or partially executed, choosing the
Save as ... command activates the possibility to choose the format RES2DINV as backup
format, in this case a further file will be saved in which the results of the table will be
stored and made available for further analysis using external programs.
Control of the Gea RM1 system
The Gea RM1 system control function is only available when the system is connected to
the PC and allows you to control all the functions of the Gea RM1 system via a PC,
making it easier to use the interface and a larger screen size.
When you entered in the Control window, the Gea RM1 system buttons are deactivated,
and a fixed screen showing the PC Control status is displayed on the system video.
Normally leaving the Gea RM1-PC program control window, the functions of the Gea
RM1 system are reactivated.
The menu structure of the commands and information shown on the Gea RM1-PC are the
same as those on the Gea RM1 system, and the screens are substantially the same, so we
refer to chapter 6 of this manual to describe how to use the control function the system
from the PC.
The commands applied from PC are identical to the four of the Gea RM1 system, and are
described below.
- "Up" button of the Gea RM1 system: the command can be executed using the "Up"
button of the GUI of the Gea RM1-PC program, with the "Up arrow" or "Page up" keys
of the PC keyboard.