PASER CONVERSO MUTE
MANUAL OF INSTALLATION AND USE
rev 1.0 12
INSTALLATION
The installation is simple due to the fact that it must to be equipped with the P&P harness.
The operation to follow are:
Remove the OEM radio.
Connect the P&P harness.
Connect the Parrot MKi9X00 central unit.
Lay down the microphone.
Lay down the harness.
1
2
3
4
5
6
7
Connection diagram
1.
MKi9X00 CAR KIT
2.
“FAKRA” PLUG CONNECT TO THE RADIO
3.
“FAKRA” PLUG CONNECT TO THE RADIO
4.
CONVERSO MUTE MODULE
5. MICROPHONE
6.
CONNECT TO THE CAR KIT
7.
IPOD, USB, AUX IN CONNECTIONS
8.
INSERT THE DISPLAY OF THE CAR KIT (ONLY MKi9100)
OTHERWIES KEEP THE CAP CONNECTED
8
1 2 3 4 5 6 7 8
BMW / MINI
SETTING
1 2 3 4 5 6 7 8
ALTEA / LEON /
ALHAMBRA
SETTING
1 2 3 4 5 6 7 8
IBIZA MODE B -
EVOLVED
SETTING
1 2 3 4 5 6 7 8
AUDI A1
SETTING
Paser Converso Mute was studied to equip the cars listed as compatible, with Parrot Bluetooth car kit.
The unit allows the user to control the function of the car kit trough the steering wheel commands without interact with the OEM radio.
In fact the module is able to create a virtual MUTE by filtering, during the use of the car kit, the steering wheel commands usually sent
to the OEM radio.
The kit is composed PASER CONVERSO MUTE adapter, the plug and play harness it is not included , please refer to the list of com-
patibility below.
With Paser Converso Mute it’s possible to control the music functions such as iPod, USB and AUX input
.
1 2 3 4 5 6 7 8
BMW X3
SETTING
The information in this guide are purely for information purposes, therefore, are subject to change without notice. At the time of publication the information is
correct and reliable. However Paser can not be held responsible for any consequences resulting from errors or omissions in this manual. Paser reserves the
right to improve / change the product or manual without obligation to notify users.
