Meter Stick Optics Components Kit
Meter Stick Optics Components Kit
OS-7053
About the pr
About the product
oduct
This set includes the components needed to perform a variety of
optics experiments with a meter stick. All the components are
designed to work with the Aluminum Meter Stick (ME-7032), but are
also compatible with most standard wood meter sticks.
What'
What's included
s included
• Light Source (OS-7054)
Light Source (OS-7054)
Includes a USB cable for charging the battery.
• 2×Component Holder (OS-7055)
2×Component Holder (OS-7055)
• Viewing Screen (OS-7056)
Viewing Screen (OS-7056)
• Lens Set (OS-7057)
Lens Set (OS-7057)
Includes three lenses: -150 mm, +100 mm, and +200 mm.
• Storage Box
Storage Box
FFeatur
eatures
es
Light Sour
Light Source
ce
CAUTION:
CAUTION: This device contains an intense LED light. Do not look
directly into the light during operation.
1
2
3
4
5
Object
Object
The object is a backlit, translucent screen with crossed arrows
printed on it. The pattern is asymmetrical so you can tell if the
image is reversed or inverted. The horizontal and vertical arrows
are 2 cm long. The horizontal arrow also includes two lines that
are spaced 1 cm apart.
1
Meter stick slot
Meter stick slot
Insert the zero end of the meter stick into this slot. This places
the object at the zero-centimeter mark.
2
USB charging port
USB charging port
Use the USB cable to connect the USB port to a USB wall charger
to charge the battery.
3
Battery status light
Battery status light
The light indicates the battery level and charging status:
LL
IGHT
SS
TATUS
Red, blink
Low battery level
Green, solid
Fully charged
Yellow, solid
Charging
4
Power switch
Power switch
Use the switch to turn the light source on and off.
5
Product Guide
012-17016A
Meter Stick Optics Components Kit | 1
