64bit LBA: the max size = 512TB, for UNIX , Linux 2.6> kernel, Windows 2003>.
4K Block: the max size = 16TB, just use with “basic disk manager “ under OS
Window 2000, 2003 or XP. Noted that can’t be used by with dynamic disk
manager.
Initialization Mode:
Set the “
Initialization Mode”
for the Volume Set. Foreground mode is faster
completion and background is instant available. No init mode is for rescuing
volume.
If you try to Rescue Missing volume set, please contact a
Partners Data System support engineer for assistance.
Strip Size:
This parameter sets the size of the stripe written to each disk in a RAID 0, 1,
0+1, 5 or 6 logical drive. You can set the stripe size to 4KB, 8KB, 16KB, 32KB,
64KB, or 128KB.
A larger stripe size produces better read performance, especially if your
computer does mostly sequential reads. However, if you are sure that your
computer does random reads more often, select a small stripe size
Note: RAID level 3 can’t modify strip size.
Cache Mode:
The RAID subsystem supports Write-Through Cache and Write-Back Cache.
Tag Queuing:
The Enabled option is useful for enhancing overall system performance under
multi-tasking operating systems. The Command Tag (Drive Channel) function
controls the SAS command tag queuing support for each drive channel. This
function should normally remain enabled. Disable this function only when using
older SAS drives that do not support command tag queuing
SAS Port/LUN Base/LUN:
SAS Port
: Two 3Gbps SAS channel can be applied to the internal RAID
subsystem. Choose the SAS Port# option
0
,
1
and
0&1 cluster
.
