Chapter 2
Getting Started
Getting started with the subsystem consists of the following
sections:
•
Unpack the storage subsystem.
•
Identifying Parts of the subsystem.
•
Connect the SAS Cables.
•
Power on the subsystem.
•
Install Hard Drives.
2.1 Unpacking the Subsystem
Before continuing, first unpack the subsystem and verify that the contents of
the shipping carton are all there and in good condition. Before removing the
subsystem from the shipping carton, visually inspect the physical condition of
the shipping carton. Exterior damage to the shipping carton may indicate that
the contents of the carton are damaged.
If any damage is found, do not
remove the components; contact Partners Data System for further
instructions by calling 800-550-3005, option 2 for support or contacting
your account manager
.
