manualshive.com logo in svg

Particulate Systems NanoPlus, Руководство оператора

Поделиться
Скачать
Particulate Systems NanoPlus Скачать руководство пользователя страница 84

Working with SOPs

NanoPlus Operator’s Manual

4-4

Mar 2014

Importing SOPs

Use this option to import an SOP; for example, you may wish to import one that is used at another 
location.

1.

Click 

Import SOP

 in the SOP Panel Tasks; the Particle (or Zeta) Import File dialog opens.

Click this button
to locate the file
you wish to import

2.

Click the 

Ellipsis (...) 

button next to the

 Import File

 field; a file selection dialog is displayed.

3.

Navigate to the file location, select the desired file, and click 

Open

. 

4.

Select the files you wish to import.

5.

Click 

Import Selected Files

.  

A file cannot be imported if it has the same name as one already listed in the SOP 
Listing. You will be prompted to change the  name of the file (SOP or parameter).

• the file is imported 
•

Import Complete

 displays at the bottom of the dialog

6.

Click 

Close

 to close the dialog.

Содержание NanoPlus





























































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды