Particulate Systems HPVA Series, Руководство оператора, Страница: 41 / 124

HPVA Series Operator’s Manual Running the Experiment
Mar 2011 2-21
2. Choose one of the following:
• To enter a new set of experiment parameters, proceed to step 3.
• To use an existing set of experiment parameters:
a. Click Recall Template to display the Select Experiment Template File to Load window.
b. Select the template name, then click Load.
c. Enter an experiment ID in the Expt ID field.
c. Make any desired changes.
d. Proceed to Step 10.
3. Enter an ID for the experiment.
4. Enter an Operator ID for the experiment.
5. Under Use Sample Ports , click 1. The window shows ports 1 through 4; however, the models
covered in this manual, the HPVA-100 and HPVA-200, have only one sample port.
6. Enter the weight of the sample that was calculated when preparing the sample.
7. Enter the sample name and, optionally, the lot number and notes.
8. Enter Low and High Pressure Factors if desired.